Re: Info about ACPI/PCI vs ISA
[][][][][][]
To: Bjorn Helgaas &&
Subject: Re: Info about ACPI/PCI vs ISA
From: Stephane Grosjean &&
Date: Fri, 26 Oct :51 +0200
Robert Hancock &&,
In-reply-to: &CAErSpo7vk6d1RCWQPFL9PqqwbH5u+F=uyPywCM_3s***F3RW34g@&
Organization: PEAK-System
Reply-to: Stephane Grosjean &&
User-agent: Mozilla/5.0 (Windows NT 6.1; rv:16.0) Gecko/ Thunderbird/16.0.1
Thanks for your answer. See my comments below...
Le 26/10/, Bjorn Helgaas a écrit :
On Wed, Sep 26, 2012 at 2:19 AM, Stephane Grosjean
&s.grosjean@xxxxxxxxxxxxxxx& wrote:
I'm working on an issue with one of our PCI adapters.
This PCI adapter is a standard and well proven board, for many years:
$ lspci -v
04:08.0 Network controller: PEAK-System Technik GmbH PCAN-PCI CAN-Bus
controller (rev 02)
Subsystem: PEAK-System Technik GmbH 2 Channel CAN Bus SJC1000
Flags: medium devsel, IRQ 11
Memory at f-bit, non-prefetchable) [size=64K]
Memory at f-bit, non-prefetchable) [size=64K]
Kernel driver in use: pcan
Where's the source for the &pcan& driver?
I see the pcan_usb driver
in the tree, but that looks like something different from what you're
looking at here.
The &pcan& driver is an out-ot-tree driver which offers a chardev
interface, not a mainline driver. The &pcan_usb& (as well as
peak_pci...) are our recent linux-can (only) drivers.
Since the &pcan& driver does exist since the old ages of 2.4 kernels, we
need to continue to support it. See also below for more information
about that...
Does the device work under any version of Linux?
If so, please
collect the complete dmesg log from the newest working version, and
the same log from the broken version.
Yes it does! Anyway, you'll find the complete dmesg.txt attached to that
e-mail. Hoping this could help.
Does this adapter work in some systems but not others?
Under Windows
but not under Linux?
You refer to the &good old& driver, so I infer
that it works *somewhere* and I'm trying to figure out what's
different about the case where it doesn't work.
This adapter works under Windows and Linux systems since several years ago.
But in case you want to check some things that could help:
1. you could find pieces of information into
drivers/net/can/sja1000/peak_pci.c: this mainline driver handles things
almost like the oot &pcan& driver does
2. you can also have a look to the sources of the &pcan& driver, by
downloading the tarball from our website:
In any cases, thanks for your help!
My questions are:
- why does the system not succeed to &derive& routing for INTA? And why us?
The derivation is based on ACPI _PRT tables.
Regrettably, we don't
dump the _PRT contents in dmesg, so we'd need an acpidump to look
further into that.
Well unfortunately, we are not able to provide this kind of information
at this moment.
PEAK-System Technik GmbH, Otto-Roehm-Strasse 69, D-64293 Darmstadt
Geschaeftsleitung: A.Gach/U.Wilhelm,St.Nr.:007/241/13586 FA Darmstadt
HRB-9183 Darmstadt, Ust.IdNr.:DE , WEE-Reg.-Nr.: DE
Tel.+49 (0) / Fax:+49 (0), info@xxxxxxxxxxxxxxx
0.000000] Initializing cgroup subsys cpuset
0.000000] Initializing cgroup subsys cpu
0.000000] Linux version 3.1.9-1.4-desktop (geeko@buildhost) (gcc version 4.6.2 (SUSE Linux) ) #1 SMP PREEMPT Fri Jan 27 08:55:10 UTC 2012 (efb5ff4)
0.000000] Disabled fast string operations
0.000000] BIOS-provided physical RAM map:
BIOS-e820: 0000 - d800 (usable)
BIOS-e820: d800 - a0000 (reserved)
BIOS-e820: e0000 - 0000 (reserved)
BIOS-e820: 0000 - 0000 (usable)
BIOS-e820: 0000 - 0000 (reserved)
BIOS-e820: 0000 - 0000 (usable)
BIOS-e820: 0000 - 0000 (reserved)
BIOS-e820: 0000 - c000 (usable)
BIOS-e820: c000 - daeef000 (reserved)
BIOS-e820: daeef000 - daf9f000 (ACPI NVS)
BIOS-e820: daf9f000 - dafff000 (ACPI data)
BIOS-e820: dafff000 - 0000 (usable)
BIOS-e820: 0000 - dfa00000 (reserved)
BIOS-e820: 0000 - 0000 (reserved)
BIOS-e820: fec00000 - fec01000 (reserved)
BIOS-e820: fed08000 - fed09000 (reserved)
BIOS-e820: fed10000 - fed1a000 (reserved)
BIOS-e820: fed1c000 - fed20000 (reserved)
BIOS-e820: fee00000 - fee01000 (reserved)
BIOS-e820: ffd80000 - 0000 (reserved)
BIOS-e820: 0000 - 0000 (usable)
0.000000] NX (Execute Disable) protection: active
0.000000] DMI 2.6 present.
0.000000] DMI: Intel Corporation SugarBay Platform/SCPT_CRB, BIOS LV_67G_Ver_T26 X64 04/05/2012
0.000000] e820 update range: 0000 - 0000 (usable) ==& (reserved)
0.000000] e820 remove range: a0000 - 0000 (usable)
0.000000] last_pfn = 0x11e600 max_arch_pfn = 0x1000000
0.000000] MTRR default type: uncachable
0.000000] MTRR fixed ranges enabled:
00000-9FFFF write-back
A0000-BFFFF uncachable
C0000-FFFFF write-protect
0.000000] MTRR variable ranges enabled:
mask F write-back
mask FC0000000 write-back
2 base 0C0000000 mask FE0000000 write-back
3 base 0DC000000 mask FFC000000 uncachable
4 base 0DB000000 mask FFF000000 uncachable
mask FE0000000 write-back
6 base 11F000000 mask FFF000000 uncachable
7 base 11E800000 mask FFF800000 uncachable
8 base 11E600000 mask FFFE00000 uncachable
9 base 0FFC00000 mask FFFC00000 write-protect
0.000000] x86 PAT enabled: cpu 0, old 0x6, new 0x6
0.000000] found SMP MP-table at [c00f00e0] f00e0
0.000000] initial memory mapped : 0 -
0.000000] Base memory trampoline at [c000 size 16384
0.000000] init_memory_mapping:
- 0 page 4k
0.000000] kernel direct mapping tables up to 371fe000 @ 11f
0.000000] RAMDISK: 1f721000 - 1fff0000
0.000000] ACPI: RSDP 000f (v02 PTEC
0.000000] ACPI: XSDT daffe120 00084 (v01 PTEC
0.000000] ACPI: FACP dafee000 000F4 (v03 PTEC
0.000000] ACPI: DSDT daffB (v02 PTEC
0.000000] ACPI: FACS daf3e000 00040
0.000000] ACPI: SLIC daffd000 00176 (v01 PTEC
0.000000] ACPI: SSDT daffb000 01068 (v01 PTEC
0.000000] ACPI: ASF! daff (v32 PTEC
0.000000] ACPI: HPET dafed000 00038 (v01 PTEC
0.000000] ACPI: APIC dafec000 00098 (v01 PTEC
0.000000] ACPI: MCFG dafeb000 0003C (v01 PTEC
0.000000] ACPI: SSDT dafea000 0090C (v01
0.000000] ACPI: SSDT dafe (v01
0.000000] ACPI: UEFI dafeE (v01 PTEC
0.000000] ACPI: UEFI dafe (v01 PTL
0.000000] ACPI: UEFI dafe (v01 PTEC
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] No NUMA configuration found
0.000000] Faking a node at 11e600000
0.000000] node 0 pfn: [0 - 11e600]
0.000000] remap_alloc: node 0 [11ce600000) -& [f4c00)
0.000000] Initmem setup node 0 11e600000
NODE_DATA [c00000 - c01fff] (remapped)
0.00MB HIGHMEM available.
0.1MB LOWMEM available.
0.000000] max_low_pfn = 371fe, highstart_pfn = 371fe
0.000000] Low memory ends at vaddr f71fe000
0.000000] High memory starts at vaddr f71fe000
mapped low ram: 0 - 371fe000
low ram: 0 - 371fe000
0.000000] Node: 0, start_pfn: 10, end_pfn: 9d
Setting physnode_map array to node 0 for pfns:
0.000000] Node: 0, start_pfn: 100, end_pfn: 20000
Setting physnode_map array to node 0 for pfns:
0.000000] Node: 0, start_pfn: 20200, end_pfn: 40000
Setting physnode_map array to node 0 for pfns:
0.000000] Node: 0, start_pfn: 40200, end_pfn: da47c
Setting physnode_map array to node 0 for pfns:
a a8200 ac200 b b8200 bc200 c c8200 cc200 d d8200
0.000000] Node: 0, start_pfn: dafff, end_pfn: db000
Setting physnode_map array to node 0 for pfns:
0.000000] Node: 0, start_pfn: 100000, end_pfn: 11e600
Setting physnode_map array to node 0 for pfns:
000 c000 000 c000
0.000000] Zone PFN ranges:
0x -& 0x000371fe
0x000371fe -& 0x
0.000000] Movable zone start PFN for each node
0.000000] early_node_map[6] active PFN ranges
0: 0x -& 0x0000009d
0: 0x -& 0x
0: 0x -& 0x
0: 0x -& 0x000da47c
0: 0x000dafff -& 0x000db000
0: 0x -& 0x
0.000000] On node 0 totalpages: 1017354
0.000000] free_area_init_node: node 0, pgdat f4c00000, node_mem_map f4c02200
DMA zone: 32 pages used for memmap
DMA zone: 0 pages reserved
DMA zone: 3949 pages, LIFO batch:0
Normal zone: 1732 pages used for memmap
Normal zone: 219450 pages, LIFO batch:31
HighMem zone: 7401 pages used for memmap
HighMem zone: 784790 pages, LIFO batch:31
0.000000] Using APIC driver default
0.000000] ACPI: PM-Timer IO Port: 0x408
0.000000] ACPI: Local APIC address 0xfee00000
0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x06] enabled)
0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1])
0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1])
0.000000] ACPI: IOAPIC (id[0x0e] address[0xfec00000] gsi_base[0])
0.000000] IOAPIC[0]: apic_id 14, version 32, address 0xfec00000, GSI 0-23
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
0.000000] ACPI: IRQ0 used by override.
0.000000] ACPI: IRQ2 used by override.
0.000000] ACPI: IRQ9 used by override.
0.000000] Using ACPI (MADT) for SMP configuration information
0.000000] ACPI: HPET id: 0x base: 0xfed00000
0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
0.000000] nr_irqs_gsi: 40
0.000000] PM: Registered nosave memory: d000 - e000
0.000000] PM: Registered nosave memory: e000 - a0000
0.000000] PM: Registered nosave memory: a0000 - e0000
0.000000] PM: Registered nosave memory: e0000 - 0000
0.000000] PM: Registered nosave memory: 0000 - 0000
0.000000] Allocating PCI resources starting at dfa00000 (gap: dfa00)
0.000000] Booting paravirtualized kernel on bare hardware
0.000000] setup_percpu: NR_CPUS:128 nr_cpumask_bits:128 nr_cpu_ids:8 nr_node_ids:1
0.000000] PERCPU: Embedded 13 pages/cpu @f4a0 r0 d2
0.000000] pcpu-alloc: s3104 u262144 alloc=1*2097152
0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
0.000000] Built 1 zonelists in Zone order, mobility grouping on.
Total pages: 1008189
0.000000] Policy zone: HighMem
0.000000] Kernel command line: root=/dev/disk/by-id/ata-SPCC_Solid_State_DiskB28_-part2 resume=/dev/disk/by-id/ata-SPCC_Solid_State_DiskB28_-part1 splash=silent quiet vga=0x31b
0.000000] bootsplash: silent mode.
0.000000] PID hash table entries: 4096 (order: 2, 16384 bytes)
0.000000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes)
0.000000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes)
0.000000] Initializing CPU#0
0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
0.000000] allocated
bytes of page_cgroup
0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
0.000000] Initializing HighMem for node 0 (000371fe:)
0.000000] Memory: 91968k available (5190k kernel code, 76156k reserved, 3876k data, 488k init, 3131900k highmem)
0.000000] virtual kernel memory layout:
: 0xff5b4000 - 0xfffff000
(10540 kB)
: 0xff200000 - 0xff400000
vmalloc : 0xf79fe000 - 0xff1fe000
: 0xc0000000 - 0xf71fe000
.init : 0xc0adb000 - 0xc0b55000
.data : 0xc071198c - 0xc0adab00
.text : 0xc0200000 - 0xc071198c
0.000000] Checking if this processor honours the WP bit even in supervisor mode...Ok.
0.000000] Preemptible hierarchical RCU implementation.
0.000000] NR_IRQS:8448 nr_irqs:744 16
0.000000] CPU 0 irqstacks, hard=f340a000 soft=f340c000
0.000000] Extended CMOS year: 2000
0.000000] Console: colour dummy device 80x25
0.000000] console [tty0] enabled
0.000000] hpet clockevent registered
0.000000] Fast TSC calibration using PIT
0.001000] Detected
MHz processor.
0.000001] Calibrating delay loop (skipped), value calculated using timer frequency.. 5587.08 BogoMIPS (lpj=2793544)
0.000004] pid_max: default: 32768 minimum: 301
0.000027] Security Framework initialized
0.000038] AppArmor: AppArmor initialized
0.000071] Mount-cache hash table entries: 512
0.000151] Initializing cgroup subsys cpuacct
0.000155] Initializing cgroup subsys memory
0.000162] Initializing cgroup subsys devices
0.000163] Initializing cgroup subsys freezer
0.000174] Initializing cgroup subsys net_cls
0.000175] Initializing cgroup subsys blkio
0.000180] Initializing cgroup subsys perf_event
0.000201] Disabled fast string operations
0.000203] CPU: Physical Processor ID: 0
0.000204] CPU: Processor Core ID: 0
0.000207] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
0.000208] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
0.000210] mce: CPU supports 9 MCE banks
0.000222] CPU0: Thermal monitoring enabled (TM1)
0.000229] using mwait in idle threads.
0.000957] ACPI: Core revision
0.007392] Enabling APIC mode:
Using 1 I/O APICs
0.007724] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
0.017710] CPU0: Intel(R) Core(TM) i5-2300 CPU @ 2.80GHz stepping 07
0.118992] Performance Events: PEBS fmt1+, SandyBridge events, Intel PMU driver.
0.118997] ... version:
0.118998] ... bit width:
0.118999] ... generic registers:
0.119000] ... value mask:
0000ffffffffffff
0.119001] ... max period:
0.119002] ... fixed-purpose events:
0.119003] ... event mask:
0.127505] NMI watchdog enabled, takes one hw-pmu counter.
0.134982] CPU 1 irqstacks, hard=f354e000 soft=f3550000
0.134985] Booting Node
0, Processors
0.134988] smpboot cpu 1: start_ip = 99000
0.145638] Initializing CPU#1
0.205859] Disabled fast string operations
0.225922] NMI watchdog enabled, takes one hw-pmu counter.
0.231832] CPU 2 irqstacks, hard=f3566000 soft=f3568000
0.231837] smpboot cpu 2: start_ip = 99000
0.242158] Initializing CPU#2
0.302702] Disabled fast string operations
0.322767] NMI watchdog enabled, takes one hw-pmu counter.
0.328674] CPU 3 irqstacks, hard=f359c000 soft=f359e000
0.328678] smpboot cpu 3: start_ip = 99000
0.339000] Initializing CPU#3
0.399544] Disabled fast string operations
0.419609] NMI watchdog enabled, takes one hw-pmu counter.
0.421506] Brought up 4 CPUs
0.421509] Total of 4 processors activated (22346.87 BogoMIPS).
0.423706] devtmpfs: initialized
0.423826] PM: Registering ACPI NVS region at daeef000 (720896 bytes)
0.423964] print_constraints: dummy:
0.423994] RTC time:
7:32:29, date: 09/24/12
0.424028] NET: Registered protocol family 16
0.424193] ACPI: bus type pci registered
0.424249] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xfxfbffffff] (base 0xf8000000)
0.424252] PCI: MMCONFIG at [mem 0xfxfbffffff] reserved in E820
0.424253] PCI: Using MMCONFIG for extended config space
0.424254] PCI: Using configuration type 1 for base access
0.425105] bio: create slab &bio-0& at 0
0.425169] ACPI: Added _OSI(Module Device)
0.425170] ACPI: Added _OSI(Processor Device)
0.425172] ACPI: Added _OSI(3.0 _SCP Extensions)
0.425173] ACPI: Added _OSI(Processor Aggregator Device)
0.426885] ACPI: EC: Look up EC in DSDT
0.428846] ACPI: Executed 1 blocks of module-level executable AML code
0.438521] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
0.438978] ACPI: SSDT daee (v01
0.439431] ACPI: Dynamic OEM Table Load:
0.439433] ACPI: SSDT
(null) 00727 (v01
0.441806] ACPI: SSDT daee1a98 00303 (v01
0.442309] ACPI: Dynamic OEM Table Load:
0.442311] ACPI: SSDT
(null) 00303 (v01
0.444690] ACPI: SSDT daedfd98 00119 (v01
0.445133] ACPI: Dynamic OEM Table Load:
0.445135] ACPI: SSDT
(null) 00119 (v01
0.448271] ACPI: Interpreter enabled
0.448277] ACPI: (supports S0 S3 S4 S5)
0.448297] ACPI: Using IOAPIC for interrupt routing
0.457014] ACPI: Power Resource [FN00] (off)
0.457104] ACPI: Power Resource [FN01] (off)
0.457194] ACPI: Power Resource [FN02] (off)
0.457282] ACPI: Power Resource [FN03] (off)
0.457370] ACPI: Power Resource [FN04] (off)
0.458091] ACPI: ACPI Dock Station Driver: 1 docks/bays found
0.458093] HEST: Table not found.
0.458095] PCI: Using host bridge windows from ACPI; if necessary, use &pci=nocrs& and report a bug
0.458793] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
0.459530] pci_root PNP0A08:00: host bridge window [io
0.459533] pci_root PNP0A08:00: host bridge window [io
0x0d00-0xffff]
0.459534] pci_root PNP0A08:00: host bridge window [mem 0x000abffff]
0.459537] pci_root PNP0A08:00: host bridge window [mem 0xdfa00000-0xfeafffff]
0.459539] pci_root PNP0A08:00: host bridge window [mem 0xfed40000-0xfed44fff]
0.459550] pci .0: [] type 0 class 0x000600
0.459581] pci .0: [] type 0 class 0x000300
0.459590] pci .0: reg 10: [mem 0xfxf03fffff 64bit]
0.459596] pci .0: reg 18: [mem 0xexefffffff 64bit pref]
0.459600] pci .0: reg 20: [io
0.459648] pci .0: [a] type 0 class 0x000780
0.459670] pci .0: reg 10: [mem 0xfxfbit]
0.459731] pci .0: PME# supported from D0 D3hot D3cold
0.459736] pci .0: PME# disabled
0.459768] pci a.0: [d] type 0 class 0x000c03
0.459788] pci a.0: reg 10: [mem 0xfxf07093ff]
0.459860] pci a.0: PME# supported from D0 D3hot D3cold
0.459864] pci a.0: PME# disabled
0.459889] pci b.0: [] type 0 class 0x000403
0.459904] pci b.0: reg 10: [mem 0xfxf0703fff 64bit]
0.459957] pci b.0: PME# supported from D0 D3hot D3cold
0.459961] pci b.0: PME# disabled
0.459987] pci c.0: [] type 1 class 0x000604
0.460089] pci c.0: PME# supported from D0 D3hot D3cold
0.460093] pci c.0: PME# disabled
0.460132] pci c.4: [] type 1 class 0x000604
0.460232] pci c.4: PME# supported from D0 D3hot D3cold
0.460238] pci c.4: PME# disabled
0.460273] pci c.5: [a] type 1 class 0x000604
0.460374] pci c.5: PME# supported from D0 D3hot D3cold
0.460379] pci c.5: PME# disabled
0.460415] pci d.0: [] type 0 class 0x000c03
0.460435] pci d.0: reg 10: [mem 0xfxf07083ff]
0.460510] pci d.0: PME# supported from D0 D3hot D3cold
0.460514] pci d.0: PME# disabled
0.460534] pci e.0: [e] type 1 class 0x000604
0.460591] pci f.0: [e] type 0 class 0x000601
0.460700] pci f.2: [] type 0 class 0x000101
0.460714] pci f.2: reg 10: [io
0x40b8-0x40bf]
0.460722] pci f.2: reg 14: [io
0x40cc-0x40cf]
0.460730] pci f.2: reg 18: [io
0x40b0-0x40b7]
0.460738] pci f.2: reg 1c: [io
0x40c8-0x40cb]
0.460746] pci f.2: reg 20: [io
0.460754] pci f.2: reg 24: [io
0.460790] pci f.3: [] type 0 class 0x000c05
0.460805] pci f.3: reg 10: [mem 0xfxf07040ff 64bit]
0.460826] pci f.3: reg 20: [io
0xefa0-0xefbf]
0.460858] pci f.5: [] type 0 class 0x000101
0.460872] pci f.5: reg 10: [io
0x40a8-0x40af]
0.460880] pci f.5: reg 14: [io
0x40c4-0x40c7]
0.460888] pci f.5: reg 18: [io
0x40a0-0x40a7]
0.460896] pci f.5: reg 1c: [io
0x40c0-0x40c3]
0.460904] pci f.5: reg 20: [io
0.460912] pci f.5: reg 24: [io
0.461012] pci c.0: PCI bridge to [bus 01-01]
0.461202] pci .0: [] type 0 class 0x000200
0.461244] pci .0: reg 10: [mem 0xfxf061ffff]
0.461292] pci .0: reg 18: [io
0.461318] pci .0: reg 1c: [mem 0xfxf0623fff]
0.461390] pci .0: reg 30: [mem 0xfffff800-0xffffffff pref]
0.461474] pci .0: PME# supported from D0 D3hot D3cold
0.461484] pci .0: PME# disabled
0.463528] pci c.4: PCI bridge to [bus 02-02]
0.463533] pci c.4:
bridge window [io
0.463537] pci c.4:
bridge window [mem 0xfxf06fffff]
0.463701] pci .0: [] type 0 class 0x000200
0.463737] pci .0: reg 10: [mem 0xfxf051ffff]
0.463786] pci .0: reg 18: [io
0.463812] pci .0: reg 1c: [mem 0xfxf0523fff]
0.463884] pci .0: reg 30: [mem 0xfffff800-0xffffffff pref]
0.463965] pci .0: PME# supported from D0 D3hot D3cold
0.463975] pci .0: PME# disabled
0.465522] pci c.5: PCI bridge to [bus 03-03]
0.465527] pci c.5:
bridge window [io
0.465531] pci c.5:
bridge window [mem 0xfxf05fffff]
0.465574] pci .0: [001c:0001] type 0 class 0x000280
0.465587] pci .0: reg 10: [mem 0xfxf041ffff]
0.465597] pci .0: reg 14: [mem 0xfxf040ffff]
0.465670] pci e.0: PCI bridge to [bus 04-04] (subtractive decode)
0.465675] pci e.0:
bridge window [mem 0xfxf04fffff]
0.465682] pci e.0:
bridge window [io
0xcf7] (subtractive decode)
0.465683] pci e.0:
bridge window [io
0x0d00-0xffff] (subtractive decode)
0.465685] pci e.0:
bridge window [mem 0x000abffff] (subtractive decode)
0.465687] pci e.0:
bridge window [mem 0xdfa00000-0xfeafffff] (subtractive decode)
0.465689] pci e.0:
bridge window [mem 0xfed40000-0xfed44fff] (subtractive decode)
0.465718] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
0.465888] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT]
0.466001] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
0.466050] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP05._PRT]
0.466094] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP06._PRT]
pci0000:00: Requesting ACPI _OSC control (0x1d)
pci0000:00: ACPI _OSC control (0x1d) granted
0.471267] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
0.471323] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
0.471378] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
0.471434] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
0.471487] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
0.471541] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
0.471594] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 *10 11 12 14 15)
0.471647] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
0.471712] vgaarb: device added: PCI:.0,decodes=io+mem,owns=io+mem,locks=none
0.471720] vgaarb: loaded
0.471721] vgaarb: bridge control possible .0
0.471848] SCSI subsystem initialized
0.471880] libata version 3.00 loaded.
0.471918] usbcore: registered new interface driver usbfs
0.471930] usbcore: registered new interface driver hub
0.471947] usbcore: registered new device driver usb
0.472000] PCI: Using ACPI for IRQ routing
0.473486] PCI: pci_cache_line_size set to 64 bytes
0.473812] reserve RAM buffer: d800 - ffff
0.473814] reserve RAM buffer: c000 - dbffffff
0.473816] reserve RAM buffer: 0000 - dbffffff
0.473818] reserve RAM buffer: 0000 - fffffff
0.473892] NetLabel: Initializing
0.473893] NetLabel:
domain hash size = 128
0.473894] NetLabel:
protocols = UNLABELED CIPSOv4
0.473902] NetLabel:
unlabeled traffic allowed by default
0.473911] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
0.473915] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
0.475932] Switching to clocksource hpet
0.476419] Switched to NOHz mode on CPU #0
0.476505] Switched to NOHz mode on CPU #1
0.476508] Switched to NOHz mode on CPU #2
0.476510] Switched to NOHz mode on CPU #3
0.477892] AppArmor: AppArmor Filesystem Enabled
0.477904] pnp: PnP ACPI init
0.477912] ACPI: bus type pnp registered
0.478295] pnp 00:00: [bus 00-3e]
0.478297] pnp 00:00: [io
0xcf7 window]
0.478299] pnp 00:00: [io
0x0cf8-0x0cff]
0.478300] pnp 00:00: [io
0x0d00-0xffff window]
0.478302] pnp 00:00: [mem 0x000abffff window]
0.478304] pnp 00:00: [mem 0x000cc3fff window]
0.478305] pnp 00:00: [mem 0x000cc7fff window]
0.478307] pnp 00:00: [mem 0x000ccbfff window]
0.478308] pnp 00:00: [mem 0x000cc000-0x000cffff window]
0.478310] pnp 00:00: [mem 0x000dd3fff window]
0.478312] pnp 00:00: [mem 0x000dd7fff window]
0.478313] pnp 00:00: [mem 0x000ddbfff window]
0.478315] pnp 00:00: [mem 0x000dc000-0x000dffff window]
0.478316] pnp 00:00: [mem 0x000ee3fff window]
0.478318] pnp 00:00: [mem 0x000ee7fff window]
0.478319] pnp 00:00: [mem 0x000eebfff window]
0.478321] pnp 00:00: [mem 0x000ec000-0x000effff window]
0.478322] pnp 00:00: [mem 0x000ffffff window]
0.478324] pnp 00:00: [mem 0xdfa00000-0xfeafffff window]
0.478325] pnp 00:00: [mem 0xfed40000-0xfed44fff window]
0.478368] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
0.478398] pnp 00:01: [io
0.478400] pnp 00:01: [io
0.478401] pnp 00:01: [io
0.478402] pnp 00:01: [io
0x00c0-0x00df]
0.478404] pnp 00:01: [dma 4]
0.478423] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
0.478431] pnp 00:02: [mem 0xffxffffffff]
0.478449] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
0.478519] pnp 00:03: [mem 0xfed00000-0xfed003ff]
0.478539] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
0.478549] pnp 00:04: [io
0.478555] pnp 00:04: [irq 13]
0.478574] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
0.478583] pnp 00:05: [io
0x002e-0x002f]
0.478585] pnp 00:05: [io
0x004e-0x004f]
0.478586] pnp 00:05: [io
0.478587] pnp 00:05: [io
0.478589] pnp 00:05: [io
0.478590] pnp 00:05: [io
0.478591] pnp 00:05: [io
0.478592] pnp 00:05: [io
0.478593] pnp 00:05: [io
0.478595] pnp 00:05: [io
0x00b2-0x00b3]
0.478597] pnp 00:05: [io
0.478598] pnp 00:05: [io
0.478600] pnp 00:05: [io
0.478601] pnp 00:05: [io
0.478602] pnp 00:05: [io
0.478603] pnp 00:05: [io
0.478605] pnp 00:05: [io
0.478606] pnp 00:05: [io
0x164e-0x164f]
0.478644] system 00:05: [io
0xf] has been reserved
0.478646] system 00:05: [io
0xf] has been reserved
0.478648] system 00:05: [io
0xffff] has been reserved
0.478650] system 00:05: [io
0xffff] has been reserved
0.478651] system 00:05: [io
0x3] has been reserved
0.478653] system 00:05: [io
0xf] has been reserved
0.478655] system 00:05: [io
0xf] has been reserved
0.478657] system 00:05: [io
0x164e-0x164f] has been reserved
0.478659] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
0.478668] pnp 00:06: [io
0.478672] pnp 00:06: [irq 8]
0.478691] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
0.478718] pnp 00:07: [io
0.478749] system 00:07: [io
0x7] has been reserved
0.478751] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
0.478995] pnp 00:08: [io
0.478999] pnp 00:08: [irq 7]
0.479078] pnp 00:08: Plug and Play ACPI device, IDs PNP0400 (active)
0.479230] pnp 00:09: [io
0x03f8-0x03ff]
0.479235] pnp 00:09: [irq 4]
0.479264] pnp 00:09: Plug and Play ACPI device, IDs PNP0501 (active)
0.479429] pnp 00:0a: [io
0x02f8-0x02ff]
0.479433] pnp 00:0a: [irq 3]
0.479462] pnp 00:0a: Plug and Play ACPI device, IDs PNP0501 (active)
0.479672] pnp 00:0b: [io
0x03e8-0x03ef]
0.479673] pnp 00:0b: IRQ 11 override to edge, high
0.479677] pnp 00:0b: [irq 11]
0.479716] pnp 00:0b: Plug and Play ACPI device, IDs PNP0501 (active)
0.479878] pnp 00:0c: [io
0x02e8-0x02ef]
0.479879] pnp 00:0c: IRQ 11 override to edge, high
0.479881] pnp 00:0c: [irq 11]
0.479918] pnp 00:0c: Plug and Play ACPI device, IDs PNP0501 (active)
0.480088] pnp 00:0d: [io
0x04f8-0x04ff]
0.480090] pnp 00:0d: IRQ 11 override to edge, high
0.480091] pnp 00:0d: [irq 11]
0.480128] pnp 00:0d: Plug and Play ACPI device, IDs PNP0501 (active)
0.480291] pnp 00:0e: [io
0x04e8-0x04ef]
0.480293] pnp 00:0e: IRQ 11 override to edge, high
0.480294] pnp 00:0e: [irq 11]
0.480331] pnp 00:0e: Plug and Play ACPI device, IDs PNP0501 (active)
0.480361] pnp 00:0f: [io
0.480363] pnp 00:0f: [io
0.480367] pnp 00:0f: [irq 1]
0.480390] pnp 00:0f: Plug and Play ACPI device, IDs PNP0303 (active)
0.480422] pnp 00:10: [irq 12]
0.480444] pnp 00:10: Plug and Play ACPI device, IDs PNP0f13 (active)
0.480576] pnp 00:11: [mem 0xfed1c000-0xfed1ffff]
0.480578] pnp 00:11: [mem 0xfed10000-0xfed17fff]
0.480579] pnp 00:11: [mem 0xfed18000-0xfed18fff]
0.480581] pnp 00:11: [mem 0xfed19000-0xfed19fff]
0.480582] pnp 00:11: [mem 0xfxfbffffff]
0.480583] pnp 00:11: [mem 0xfed20000-0xfed3ffff]
0.480585] pnp 00:11: [mem 0xfed90000-0xfed93fff]
0.480586] pnp 00:11: [mem 0xfed45000-0xfed8ffff]
0.480588] pnp 00:11: [mem 0xffxffffffff]
0.480589] pnp 00:11: [mem 0xfee00000-0xfeefffff]
0.480591] pnp 00:11: [mem 0xxffffffffffffffff disabled]
0.480629] system 00:11: [mem 0xfed1c000-0xfed1ffff] has been reserved
0.480631] system 00:11: [mem 0xfed10000-0xfed17fff] has been reserved
0.480633] system 00:11: [mem 0xfed18000-0xfed18fff] has been reserved
0.480635] system 00:11: [mem 0xfed19000-0xfed19fff] has been reserved
0.480637] system 00:11: [mem 0xfxfbffffff] has been reserved
0.480639] system 00:11: [mem 0xfed20000-0xfed3ffff] has been reserved
0.480641] system 00:11: [mem 0xfed90000-0xfed93fff] has been reserved
0.480643] system 00:11: [mem 0xfed45000-0xfed8ffff] has been reserved
0.480646] system 00:11: [mem 0xffxffffffff] could not be reserved
0.480648] system 00:11: [mem 0xfee00000-0xfeefffff] could not be reserved
0.480650] system 00:11: Plug and Play ACPI device, IDs PNP0c02 (active)
0.480919] pnp 00:12: [mem 0xx201fffff]
0.480920] pnp 00:12: [mem 0xx401fffff]
0.480968] system 00:12: [mem 0xx201fffff] has been reserved
0.480978] system 00:12: [mem 0xx401fffff] has been reserved
0.480980] system 00:12: Plug and Play ACPI device, IDs PNP0c01 (active)
0.481003] pnp: PnP ACPI: found 19 devices
0.481004] ACPI: ACPI bus type pnp unregistered
0.517493] pci .0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
0.517496] pci .0: no compatible bridge window for [mem 0xfffff800-0xffffffff pref]
0.517498] PCI: max bus depth: 1 pci_try_num: 2
0.517542] pci c.4: BAR 15: assigned [mem 0xdfa00000-0xdfafffff pref]
0.517545] pci c.5: BAR 15: assigned [mem 0xdfb00000-0xdfbfffff pref]
0.517547] pci c.0: PCI bridge to [bus 01-01]
0.517565] pci .0: BAR 6: assigned [mem 0xdfa00000-0xdfa007ff pref]
0.517567] pci c.4: PCI bridge to [bus 02-02]
0.517570] pci c.4:
bridge window [io
0.517577] pci c.4:
bridge window [mem 0xfxf06fffff]
0.517582] pci c.4:
bridge window [mem 0xdfa00000-0xdfafffff pref]
0.517591] pci .0: BAR 6: assigned [mem 0xdfb00000-0xdfb007ff pref]
0.517592] pci c.5: PCI bridge to [bus 03-03]
0.517595] pci c.5:
bridge window [io
0.517602] pci c.5:
bridge window [mem 0xfxf05fffff]
0.517607] pci c.5:
bridge window [mem 0xdfb00000-0xdfbfffff pref]
0.517615] pci e.0: PCI bridge to [bus 04-04]
0.517620] pci e.0:
bridge window [mem 0xfxf04fffff]
0.517637] pci c.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16
0.517643] pci c.0: setting latency timer to 64
0.517650] pci c.4: PCI INT A -& GSI 16 (level, low) -& IRQ 16
0.517655] pci c.4: setting latency timer to 64
0.517664] pci c.5: PCI INT B -& GSI 17 (level, low) -& IRQ 17
0.517669] pci c.5: setting latency timer to 64
0.517676] pci e.0: setting latency timer to 64
0.517679] pci_bus 0000:00: resource 4 [io
0.517681] pci_bus 0000:00: resource 5 [io
0x0d00-0xffff]
0.517682] pci_bus 0000:00: resource 6 [mem 0x000abffff]
0.517684] pci_bus 0000:00: resource 7 [mem 0xdfa00000-0xfeafffff]
0.517686] pci_bus 0000:00: resource 8 [mem 0xfed40000-0xfed44fff]
0.517687] pci_bus 0000:02: resource 0 [io
0.517689] pci_bus 0000:02: resource 1 [mem 0xfxf06fffff]
0.517691] pci_bus 0000:02: resource 2 [mem 0xdfa00000-0xdfafffff pref]
0.517692] pci_bus 0000:03: resource 0 [io
0.517694] pci_bus 0000:03: resource 1 [mem 0xfxf05fffff]
0.517695] pci_bus 0000:03: resource 2 [mem 0xdfb00000-0xdfbfffff pref]
0.517697] pci_bus 0000:04: resource 1 [mem 0xfxf04fffff]
0.517698] pci_bus 0000:04: resource 4 [io
0.517700] pci_bus 0000:04: resource 5 [io
0x0d00-0xffff]
0.517701] pci_bus 0000:04: resource 6 [mem 0x000abffff]
0.517703] pci_bus 0000:04: resource 7 [mem 0xdfa00000-0xfeafffff]
0.517705] pci_bus 0000:04: resource 8 [mem 0xfed40000-0xfed44fff]
0.517754] NET: Registered protocol family 2
0.517809] IP route cache hash table entries: 32768 (order: 5, 131072 bytes)
0.517998] TCP established hash table entries: 131072 (order: 8, 1048576 bytes)
0.518171] TCP bind hash table entries: 65536 (order: 7, 524288 bytes)
0.518250] TCP: Hash tables configured (established 131072 bind 65536)
0.518252] TCP reno registered
0.518254] UDP hash table entries: 512 (order: 2, 16384 bytes)
0.518258] UDP-Lite hash table entries: 512 (order: 2, 16384 bytes)
0.518333] NET: Registered protocol family 1
0.518341] pci .0: Boot video device
0.518529] PCI: CLS 64 bytes, default 64
0.518560] Unpacking initramfs...
0.664659] Freeing initrd memory: 9020k freed
0.667122] audit: initializing netlink socket (disabled)
0.667132] type=2000 audit(.508:1): initialized
0.686264] highmem bounce pool size: 64 pages
0.686269] HugeTLB registered 2 MB page size, pre-allocated 0 pages
0.693819] VFS: Disk quotas dquot_6.5.2
0.693846] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
0.694043] msgmni has been set to 1627
0.694208] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
0.694230] io scheduler noop registered
0.694232] io scheduler deadline registered
0.694246] io scheduler cfq registered (default)
0.694349] pcieport c.0: setting latency timer to 64
0.694415] pcieport c.0: irq 40 for MSI/MSI-X
0.694515] pcieport c.4: setting latency timer to 64
0.694576] pcieport c.4: irq 41 for MSI/MSI-X
0.694680] pcieport c.5: setting latency timer to 64
0.694743] pcieport c.5: irq 42 for MSI/MSI-X
0.694857] pcieport c.0: Signaling PME through PCIe PME interrupt
0.694863] pcie_pme c.0:pcie01: service driver pcie_pme loaded
0.694885] pcieport c.4: Signaling PME through PCIe PME interrupt
0.694886] pci .0: Signaling PME through PCIe PME interrupt
0.694891] pcie_pme c.4:pcie01: service driver pcie_pme loaded
0.694911] pcieport c.5: Signaling PME through PCIe PME interrupt
0.694913] pci .0: Signaling PME through PCIe PME interrupt
0.694917] pcie_pme c.5:pcie01: service driver pcie_pme loaded
0.694974] vesafb: mode is , linelength=5120, pages=11
0.694975] vesafb: scrolling: redraw
0.694976] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
0.695817] vesafb: framebuffer at 0xe0000000, mapped to 0xf7a80000, using 10240k, total 65472k
0.695937] bootsplash 3.2.0-: looking for picture...
0.695938] bootsplash: silentjpeg size 109002 bytes
0.707623] bootsplash: ...found (, 40442 bytes, v3).
0.817438] Console: switching to colour frame buffer device 156x60
0.926829] fb0: VESA VGA frame buffer device
0.926862] intel_idle: MWAIT substates: 0x1120
0.926863] intel_idle: v0.4 model 0x2A
0.926864] intel_idle: lapic_timer_reliable_states 0xffffffff
0.926916] ERST: Table is not found!
0.926917] GHES: HEST is not enabled!
0.926985] Serial:
driver, 8 ports, IRQ sharing disabled
0.947540] serial8250: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
0.976835] serial8250: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
1.008772] serial8250: ttyS2 at I/O 0x3e8 (irq = 4) is a 16550A
1.040699] serial8250: ttyS3 at I/O 0x2e8 (irq = 3) is a 16550A
1.:09: ttyS0 at I/O 0x3f8 (irq = 4) is a 16550A
1.:0a: ttyS1 at I/O 0x2f8 (irq = 3) is a 16550A
1.:0b: ttyS2 at I/O 0x3e8 (irq = 11) is a 16550A
1.:0c: ttyS3 at I/O 0x2e8 (irq = 11) is a 16550A
1.:0d: ttyS4 at I/O 0x4f8 (irq = 11) is a 16550A
1.:0e: ttyS5 at I/O 0x4e8 (irq = 11) is a 16550A
1.290038] Non-volatile memory driver v1.3
1.290039] Linux agpgart interface v0.103
1.290135] agpgart-intel .0: Intel Sandybridge Chipset
1.290184] agpgart-intel .0: detected gtt size: 2097152K total, 262144K mappable
1.291134] agpgart-intel .0: detected 65536K stolen memory
1.291242] agpgart-intel .0: AGP aperture is 256M @ 0xe0000000
1.291368] ata_piix f.2: version 2.13
1.291386] ata_piix f.2: PCI INT B -& GSI 19 (level, low) -& IRQ 19
1.291391] ata_piix f.2: MAP [ P0 P2 P1 P3 ]
1.441602] ata_piix f.2: setting latency timer to 64
1.441840] scsi0 : ata_piix
1.441912] scsi1 : ata_piix
1.441974] ata1: SATA max UDMA/133 cmd 0x40b8 ctl 0x40cc bmdma 0x4090 irq 19
1.441979] ata2: SATA max UDMA/133 cmd 0x40b0 ctl 0x40c8 bmdma 0x4098 irq 19
1.441993] ata_piix f.5: PCI INT B -& GSI 19 (level, low) -& IRQ 19
1.441997] ata_piix f.5: MAP [ P0 -- P1 -- ]
1.592347] ata_piix f.5: SCR access via SIDPR is available but doesn't work
1.592359] ata_piix f.5: setting latency timer to 64
1.592534] scsi2 : ata_piix
1.592588] scsi3 : ata_piix
1.592620] ata3: SATA max UDMA/133 cmd 0x40a8 ctl 0x40c4 bmdma 0x4070 irq 19
1.592621] ata4: SATA max UDMA/133 cmd 0x40a0 ctl 0x40c0 bmdma 0x4078 irq 19
1.592672] Fixed MDIO Bus: probed
1.592675] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
1.592686] ehci_hcd a.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16
1.592698] ehci_hcd a.0: setting latency timer to 64
1.592702] ehci_hcd a.0: EHCI Host Controller
1.592717] ehci_hcd a.0: new USB bus registered, assigned bus number 1
1.592748] ehci_hcd a.0: debug port 2
1.596618] ehci_hcd a.0: cache line size of 64 is not supported
1.596631] ehci_hcd a.0: irq 16, io mem 0xf0709000
1.606315] ehci_hcd a.0: USB 2.0 started, EHCI 1.00
1.606349] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
1.606352] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.606355] usb usb1: Product: EHCI Host Controller
1.606357] usb usb1: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd
1.606367] usb usb1: SerialNumber: a.0
1.606454] hub 1-0:1.0: USB hub found
1.606457] hub 1-0:1.0: 2 ports detected
1.606508] ehci_hcd d.0: PCI INT A -& GSI 23 (level, low) -& IRQ 23
1.606517] ehci_hcd d.0: setting latency timer to 64
1.606520] ehci_hcd d.0: EHCI Host Controller
1.606524] ehci_hcd d.0: new USB bus registered, assigned bus number 2
1.606546] ehci_hcd d.0: debug port 2
1.610420] ehci_hcd d.0: cache line size of 64 is not supported
1.610433] ehci_hcd d.0: irq 23, io mem 0xf0708000
1.620296] ehci_hcd d.0: USB 2.0 started, EHCI 1.00
1.620324] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
1.620327] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
1.620329] usb usb2: Product: EHCI Host Controller
1.620332] usb usb2: Manufacturer: Linux 3.1.9-1.4-desktop ehci_hcd
1.620334] usb usb2: SerialNumber: d.0
1.620417] hub 2-0:1.0: USB hub found
1.620419] hub 2-0:1.0: 2 ports detected
1.620465] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
1.620475] uhci_hcd: USB Universal Host Controller Interface driver
1.620494] Initializing USB Mass Storage driver...
1.620510] usbcore: registered new interface driver usb-storage
1.620511] USB Mass Storage support registered.
1.620519] usbcore: registered new interface driver ums-alauda
1.620527] usbcore: registered new interface driver ums-cypress
1.620535] usbcore: registered new interface driver ums-datafab
1.620542] usbcore: registered new interface driver ums-freecom
1.620550] usbcore: registered new interface driver ums-isd200
1.620558] usbcore: registered new interface driver ums-jumpshot
1.620566] usbcore: registered new interface driver ums-karma
1.620573] usbcore: registered new interface driver ums-onetouch
1.620581] usbcore: registered new interface driver ums-sddr09
1.620589] usbcore: registered new interface driver ums-sddr55
1.620596] usbcore: registered new interface driver ums-usbat
1.620641] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12
1.623743] serio: i8042 KBD port at 0x60,0x64 irq 1
1.623763] serio: i8042 AUX port at 0x60,0x64 irq 12
1.623837] mousedev: PS/2 mouse device common for all mice
1.623924] rtc_cmos 00:06: RTC can wake from S4
1.624021] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
1.624047] rtc0: alarms up to one month, y3k, 242 bytes nvram, hpet irqs
1.624158] cpuidle: using governor ladder
1.624333] cpuidle: using governor menu
1.624533] usbcore: registered new interface driver usbhid
1.624534] usbhid: USB HID core driver
1.624661] TCP cubic registered
1.624879] NET: Registered protocol family 10
1.625284] lib80211: common routines for IEEE802.11 drivers
1.625285] lib80211_crypt: registered algorithm 'NULL'
1.625287] Registering the dns_resolver key type
1.625299] libceph: loaded (mon/osd proto 15/24, osdmap 5/6 5/6)
1.625306] Using IPI No-Shortcut mode
1.625519] PM: Checking hibernation image partition /dev/disk/by-id/ata-SPCC_Solid_State_DiskB28_-part1
1.642726] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input0
1.666271] Refined TSC clocksource calibration:
1.666277] Switching to clocksource tsc
1.907911] usb 1-1: new high speed USB device number 2 using ehci_hcd
2.022083] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
2.022088] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
2.022377] hub 1-1:1.0: USB hub found
2.022447] hub 1-1:1.0: 6 ports detected
2.124541] usb 2-1: new high speed USB device number 2 using ehci_hcd
2.238759] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
2.238763] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
2.239058] hub 2-1:1.0: USB hub found
2.239128] hub 2-1:1.0: 8 ports detected
2.447098] ata2.00: failed to resume link (SControl 0)
2.513095] usb 2-1.1: new low speed USB device number 3 using ehci_hcd
2.602598] usb 2-1.1: New USB device found, idVendor=046d, idProduct=c05b
2.602603] usb 2-1.1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
2.602606] usb 2-1.1: Product: USB Optical Mouse
2.602608] usb 2-1.1: Manufacturer: Logitech
2.605641] input: Logitech USB Optical Mouse as /devices/pci0:00:1d.0/usb2/2-1/2-1.1/2-1.1:1.0/input/input1
2.605881] generic-usb D:C05B.0001: input,hidraw0: USB HID v1.11 Mouse [Logitech USB Optical Mouse] on usb-d.0-1.1/input0
2.759635] ata1.01: failed to resume link (SControl 0)
2.910498] ata1.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
2.910511] ata1.01: SATA link down (SStatus 0 SControl 0)
2.913754] ata1.00: ATA-8: SPCC Solid State DiskB28, 110512, max UDMA/133
2.913757] ata1.00:
sectors, multi 16: LBA48 NCQ (depth 0/32)
2.916751] ata1.00: configured for UDMA/133
2.916926] scsi 0:0:0:0: Direct-Access
SPCC Solid State 1105 PQ: 0 ANSI: 5
2.917159] sd 0:0:0:0: [sda] -byte logical blocks: (32.0 GB/29.8 GiB)
2.917482] sd 0:0:0:0: [sda] Write Protect is off
2.917485] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
2.917558] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
sda: sda1 sda2
2.918963] sd 0:0:0:0: [sda] Attached SCSI disk
3.452628] ata2.01: failed to resume link (SControl 0)
3.464165] ata2.00: SATA link down (SStatus 4 SControl 0)
3.464179] ata2.01: SATA link down (SStatus 0 SControl 0)
3.464271] PM: Hibernation image not present or could not be loaded.
3.464285] registered taskstats version 1
Magic number: 12:41:522
3.468591] rtc_cmos 00:06: setting system clock to
07:32:32 UTC ()
3.468827] Freeing unused kernel memory: 488k freed
3.469012] Write protecting the kernel text: 5192k
3.469077] Write protecting the kernel read-only data: 3536k
3.469078] NX-protecting the kernel data: 5048k
3.502350] udevd[105]: starting version 173
3.511657] ACPI: acpi_idle yielding to intel_idle
3.518335] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input2
3.518378] ACPI: Power Button [PWRF]
3.520079] [drm] Initialized drm 1.1.0
3.533986] ACPI: Fan [FAN0] (off)
3.534016] ACPI: Fan [FAN1] (off)
3.534040] ACPI: Fan [FAN2] (off)
3.534065] ACPI: Fan [FAN3] (off)
3.534089] ACPI: Fan [FAN4] (off)
3.534828] thermal LNXTHERM:00: registered as thermal_zone0
3.534835] ACPI: Thermal Zone [TZ00] (28 C)
3.534989] thermal LNXTHERM:01: registered as thermal_zone1
3.534995] ACPI: Thermal Zone [TZ01] (30 C)
3.535879] i915 .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16
3.535882] i915 .0: setting latency timer to 64
3.548942] mtrr: no more MTRRs available
3.548944] [drm] MTRR allocation failed.
Graphics performance may suffer.
3.549195] i915 .0: irq 43 for MSI/MSI-X
3.549198] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
3.549200] [drm] Driver supports precise vblank timestamp query.
3.549226] vgaarb: device changed decodes: PCI:.0,olddecodes=io+mem,decodes=io+mem:owns=io+mem
3.883359] checking generic (eff0000) vs hw (e00000)
3.883362] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
3.883374] Console: switching to colour dummy device 80x25
3.884075] fbcon: inteldrmfb (fb0) is primary device
4.216748] bootsplash: scaling image from
4.390276] bootsplash: scaling image from
4.438089] bootsplash: scaling image from
4.611545] bootsplash: scaling image from
4.644346] Console: switching to colour frame buffer device 236x63
4.659475] bootsplash: scaling image from
4.832898] bootsplash: scaling image from
4.865596] fb0: inteldrmfb frame buffer device
4.865598] drm: registered panic notifier
4.866096] acpi device:34: registered as cooling_device9
4.866271] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:00/input/input3
4.866385] ACPI: Video Device [GFX0] (multi-head: yes
4.866409] [drm] Initialized i915 1.6.0
for .0 on minor 0
4.989518] PM: Marking nosave pages: d000 - 0000
4.989522] PM: Marking nosave pages: 0000 - 0000
4.989530] PM: Basic memory bitmaps created
5.006184] PM: Basic memory bitmaps freed
5.006190] video LNXVIDEO:00: Restoring backlight state
5.026396] PM: Starting manual resume from disk
5.026398] PM: Hibernation image partition 8:1 present
5.026399] PM: Looking for hibernation image.
5.026714] PM: Image not found (code -22)
5.026715] PM: Hibernation image not present or could not be loaded.
5.043999] bootsplash: status on console 0 changed to on
5.215694] EXT4-fs (sda2): mounted filesystem with ordered data mode. Opts: acl,user_xattr
5.231391] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
5.466642] systemd[1]: systemd 37 running in system mode. (+PAM +LIBWRAP +AUDIT +SELINUX +SYSVINIT +LIBCRYPTSETUP; suse)
5.491702] systemd[1]: Set hostname to &linux-ask8.site&.
5.726541] systemd-readahead-replay[358]: Bumped block_nr parameter of 8:0 to 16384. This is a temporary hack and should be removed one day.
5.882688] udevd[385]: starting version 173
5.923881] bootsplash: status on console 0 changed to on
5.941625] bootsplash: scaling image from
5.962768] mei: module is from the staging directory, the quality is unknown, you have been warned.
5.963141] mei .0: PCI INT A -& GSI 16 (level, low) -& IRQ 16
5.963146] mei .0: setting latency timer to 64
5.966837] e1000e: Intel(R) PRO/1000 Network Driver - 1.4.4-k
5.966839] e1000e: Copyright(c) 1999 - 2011 Intel Corporation.
5.966862] e:02:00.0: Disabling ASPM L0s
5.967198] e:02:00.0: PCI INT A -& GSI 16 (level, low) -& IRQ 16
5.967217] udevd[415]: kernel-provided name 'ttyS6' and NAME= 'tts/6' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.967222] e:02:00.0: setting latency timer to 64
5.967394] e:02:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.
Falling back to MSI interrupts.
5.967464] e:02:00.0: irq 44 for MSI/MSI-X
5.967523] udevd[415]: kernel-provided name 'ttyS7' and NAME= 'tts/7' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.973310] iTCO_vendor_support: vendor-support=0
5.973492] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.06
5.973522] udevd[396]: kernel-provided name 'ttyS0' and NAME= 'tts/0' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.973582] iTCO_wdt: Found a Cougar Point TCO device (Version=2, TCOBASE=0x0460)
5.974246] udevd[396]: kernel-provided name 'ttyS1' and NAME= 'tts/1' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.974264] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
5.974598] udevd[396]: kernel-provided name 'ttyS2' and NAME= 'tts/2' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.975214] udevd[396]: kernel-provided name 'ttyS3' and NAME= 'tts/3' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.976342] udevd[396]: kernel-provided name 'ttyS4' and NAME= 'tts/4' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.977359] udevd[396]: kernel-provided name 'ttyS5' and NAME= 'tts/5' disagree, please use SYMLINK+= or change the kernel to provide the proper name
5.980895] input: PC Speaker as /devices/platform/pcspkr/input/input4
5.988573] sd 0:0:0:0: Attached scsi generic sg0 type 0
6.056766] parport_pc 00:08: reported by Plug and Play ACPI
6.056812] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
6.069370] e:02:00.0: eth0: (PCI Express:2.5GT/s:Width x1) 00:03:1d:0a:7f:18
6.069372] e:02:00.0: eth0: Intel(R) PRO/1000 Network Connection
6.069518] e:02:00.0: eth0: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
6.069526] e:03:00.0: Disabling ASPM L0s
6.069612] e:03:00.0: PCI INT A -& GSI 17 (level, low) -& IRQ 17
6.069635] e:03:00.0: setting latency timer to 64
6.069831] e:03:00.0: (unregistered net_device): Failed to initialize MSI-X interrupts.
Falling back to MSI interrupts.
6.069913] e:03:00.0: irq 45 for MSI/MSI-X
6.070681] snd_hda_intel b.0: PCI INT A -& GSI 22 (level, low) -& IRQ 22
6.070722] snd_hda_intel b.0: irq 46 for MSI/MSI-X
6.070745] snd_hda_intel b.0: setting latency timer to 64
6.085315] hda_codec: ALC888: BIOS auto-probing.
6.085318] ALSA patch_realtek.c:1228 SKU: Nid=0x1d sku_cfg=0x
6.085319] ALSA patch_realtek.c:1230 SKU: port_connectivity=0x1
6.085321] ALSA patch_realtek.c:1231 SKU: enable_pcbeep=0x0
6.085322] ALSA patch_realtek.c:1232 SKU: check_sum=0x
6.085323] ALSA patch_realtek.c:1233 SKU: customization=0x
6.085324] ALSA patch_realtek.c:1234 SKU: external_amp=0x0
6.085326] ALSA patch_realtek.c:1235 SKU: platform_type=0x0
6.085327] ALSA patch_realtek.c:1236 SKU: swap=0x0
6.085328] ALSA patch_realtek.c:1237 SKU: override=0x1
6.085331] ALSA hda_codec.c:4895 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
6.085333] ALSA hda_codec.c:4899
speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
6.085334] ALSA hda_codec.c:4903
hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
6.085336] ALSA hda_codec.c:4904
mono: mono_out=0x0
6.085337] ALSA hda_codec.c:4907
dig-out=0x1e/0x0
6.085338] ALSA hda_codec.c:4908
6.085339] ALSA hda_codec.c:4912
Rear Mic=0x18
6.085341] ALSA hda_codec.c:4912
Front Mic=0x19
6.085342] ALSA hda_codec.c:4912
6.085343] ALSA hda_codec.c:4914
6.087521] ALSA patch_realtek.c:1291 realtek: No valid SSID, checking pincfg 0x for NID 0x1d
6.087523] ALSA patch_realtek.c:1307 realtek: Enabling init ASM_ID=0xc601 CODEC_ID=10ec0888
6.091401] input: HDA Intel PCH Headphone as /devices/pci0:00:1b.0/sound/card0/input5
6.091531] i801_smbus f.3: PCI INT C -& GSI 18 (level, low) -& IRQ 18
6.144710] bootsplash: scaling image from
6.160322] ppdev: user-space parallel port driver
6.176013] e:03:00.0: eth1: (PCI Express:2.5GT/s:Width x1) 00:03:1d:0a:7f:19
6.176016] e:03:00.0: eth1: Intel(R) PRO/1000 Network Connection
6.176153] e:03:00.0: eth1: MAC: 3, PHY: 8, PBA No: FFFFFF-0FF
6.186824] pcan: Release__n (le)
6.186827] pcan: driver config [dbg] [mod] [isa] [pci] [dng] [par] [usb] [pcc]
6.186828] pcan: DEBUG is switched on
6.186842] pcan: pcan_pci_init()
6.186866] pcan: pcan_pci_probe(f368f800)
6.186877] pci e.0: can't derive routing for PCI INT A
6.186878] pcan .0: PCI INT A: no GSI - using ISA IRQ 11
6.186887] pcan: create_one_pci_device(nChannel=0)
6.186890] pcan: pcan_pci_channel_init(), _pci_devices = 0
6.186891] pcan: pcan_create_filter_chain()
6.188794] udevd[390]: renamed network interface eth0 to eth3
6.191910] pcan: pci device minor 0 found
6.191912] pcan: sja1000_probe()
6.191914] pcan: CLKDIVIDER traced (0x00)
6.191916] pcan: Hopefully switched to PeliCAN mode
6.191928] pcan: CHIPSTATUS traced (0x3c)
6.191930] pcan: INTERRUPT_STATUS traced (0x00)
6.191932] pcan: RECEIVE_MSG_COUNTER traced (0x00)
6.191933] pcan: sja1000_probe() is OK
6.191935] pcan: create_one_pci_device(nChannel=1)
6.191938] pcan: pcan_pci_channel_init(), _pci_devices = 1
6.191939] pcan: pcan_create_filter_chain()
6.191943] pcan: pci device minor 1 found
6.191944] pcan: sja1000_probe()
6.191946] pcan: CLKDIVIDER traced (0x00)
6.191948] pcan: Hopefully switched to PeliCAN mode
6.191960] pcan: CHIPSTATUS traced (0x3c)
6.191962] pcan: INTERRUPT_STATUS traced (0x00)
6.191964] pcan: RECEIVE_MSG_COUNTER traced (0x00)
6.191965] pcan: sja1000_probe() is OK
6.191983] pcan: make_legacy_devices()
6.191985] pcan: pcan_create_isa_shared_irq_lists()
6.191986] pcan: pcan_usb_register_devices()
6.191987] pcan: pcan_usb_core_init() -------------------------------------------
6.192003] usbcore: registered new interface driver pcan
6.192004] pcan: pcan_usb_register_devices() is OK
6.192005] pcan: pcan_pccard_register_devices()
6.192007] pcan: pccard_init()
6.192018] pcan: pcan_pccard_register_devices() is OK
6.192020] pcan: dev_register()
6.192021] pcan: device_create(pcanpci%d, 250, 0)
6.192064] pcan: device_create(pcanpci%d, 250, 1)
6.192088] pcan: major 250.
6.208898] ifup[580]: Service network not started and mode 'auto' -& skipping
6.248221] bootsplash: scaling image from
6.298605] udevd[389]: renamed network interface eth1 to eth2
6.423542] bootsplash: scaling image from
6.467686] EXT4-fs (sda2): warning: mounting fs with errors, running e2fsck is recommended
6.469548] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr
6.475492] ifup[622]: Service network not started and mode 'auto' -& skipping
6.477174] boot.localnet[597]: Using boot-specified hostname 'linux-ask8.site'
6.477179] boot.localnet[597]: Setting up hostname 'linux-ask8'..done
6.477189] boot.localnet[597]: Setting up loopback interface RTNETLINK answers: File exists
6.477194] boot.localnet[597]: ..done
6.916148] Adding 2103292k swap on /dev/sda1.
Priority:0 extents:1 across:2103292k SS
6.989192] microcode: CPU0 sig=0x206a7, pf=0x2, revision=0x1a
6.990953] microcode: CPU1 sig=0x206a7, pf=0x2, revision=0x1a
6.991881] microcode: CPU2 sig=0x206a7, pf=0x2, revision=0x1a
6.993010] microcode: CPU3 sig=0x206a7, pf=0x2, revision=0x1a
6.993935] microcode: Microcode Update Driver: v2.00 &tigran@xxxxxxxxxxxxxxxxxxxx&, Peter Oruba
7.002836] cpufreq[642]: Loading CPUFreq modules..done
7.018482] microcode: CPU0 updated to revision 0x1b, date =
7.018837] microcode: CPU1 updated to revision 0x1b, date =
7.019194] microcode: CPU2 updated to revision 0x1b, date =
7.019554] microcode: CPU3 updated to revision 0x1b, date =
7.019847] microcode.ctl[640]: Checking/updating CPU microcode ..done
7.560773] e:02:00.0: irq 44 for MSI/MSI-X
7.611550] e:02:00.0: irq 44 for MSI/MSI-X
7.612037] ADDRCONF(NETDEV_UP): eth3: link is not ready
7.670747] RPC: Registered named UNIX socket transport module.
7.670749] RPC: Registered udp transport module.
7.670750] RPC: Registered tcp transport module.
7.670751] RPC: Registered tcp NFSv4.1 backchannel transport module.
7.671808] FS-Cache: Loaded
7.674399] FS-Cache: Netfs 'nfs' registered for caching
7.678539] Installing knfsd (copyright (C) 1996 okir@xxxxxxxxxxxx).
7.688591] e:03:00.0: irq 45 for MSI/MSI-X
7.739369] e:03:00.0: irq 45 for MSI/MSI-X
7.739853] ADDRCONF(NETDEV_UP): eth2: link is not ready
7.876875] NFSD: Using /var/lib/nfs/v4recovery as the NFSv4 state recovery directory
7.877218] NFSD: starting 90-second grace period
8.227165] bootsplash: status on console 0 changed to on
9.459978] EXT4-fs (sda2): re-mounted. Opts: acl,user_xattr,commit=0
11.846846] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
11.847179] ADDRCONF(NETDEV_CHANGE): eth3: link becomes ready
11.847402] e1000e: eth3 NIC Link is Up 1000 Mbps Full Duplex, Flow Control: Rx/Tx
11.863632] NET: Registered protocol family 17
18.529273] fuse init (API version 7.17)
22.047854] eth3: no IPv6 routers present
765.183567] pcan: pcan_open(), major/minor = 250/0.
765.183570] pcan: pcan_search_dev(), major,minor = 250,0.
765.183572] pcan: pcan_open_path, minor = 0, path = 0.
765.183593] pcan: sja1000_open(), minor = 0.
765.183602] pcan: pcan_open_path() is OK
845.633585] pcan: pcan_read_procmem()
845.633609] pcan: pcan_read_procmem()
Follow-Ups:
From: Bjorn Helgaas
References:
From: Stephane Grosjean
From: Bjorn Helgaas
Prev by Date:
Next by Date:
Previous by thread:
Next by thread:
Index(es):