这是什么情况？
这是什么情况？
就这两天，下颚右边最后个牙齿中间那里有点黄白色的，然后用手去碰它，一接触就有酸痛的感觉，最近也有咽喉炎，有异物感，有联系不？会不会死啊？
我咽喉炎一段时间了还不好而且越来严重，想做个鼻咽喉镜检查一下，请问耳鼻喉镜是不是可以检查鼻子，喉咙？是不是可以确定有什么东西？
医院出诊医生
擅长：鼻炎、鼻塞、鼻过敏等
擅长：小儿内科
共3条医生回复
因不能面诊，医生的建议及药品推荐仅供参考
职称：主治医师
专长：耳鼻喉科常见疾病，包括耳聋，耳鸣、中耳炎、鼓膜穿孔...
&&已帮助用户：16730
你好，你说的情况，可以发个嗓子的照片，考虑是咽喉炎，牙龈囊肿可能，最好还是发个照片看看
职称：医师
专长：牙龈炎,牙周炎,牙髓病
&&已帮助用户：97153
指导意见：朋友您好，这种情况牙龈炎引起的，跟咽喉炎关系不大，可以口服甲硝唑进行治疗，如果症状不能缓解建议去医院的口腔科做下检查，确诊病因后对症治疗。
职称：副主任医师
专长：龋齿病,颌面部疖痈,楔状缺损,四环素牙,牙髓病,根...
&&已帮助用户：12962
指导意见：你好，你说的情况与咽炎无关，但具体是什么问题应该面诊检查，我这边又不能给你面诊，建议最好去当地医院检查治疗。好吗？
问慢性咽喉炎有牙齿咬合有异物感的症状吗？
职称：主治医师
专长：耳鼻喉科常见疾病，包括耳聋，耳鸣、中耳炎、鼓膜穿孔，慢性鼻炎、鼻窦炎、过敏性鼻炎鼻中隔偏曲、鼻息肉、咽喉炎，声带息肉、扁桃体炎、喉部以及颈部肿瘤疾病的诊断治疗。
&&已帮助用户：16730
问题分析：这个一般是有这个咽喉炎的现像，可以吃一些消炎药，就可以达到治疗的效果就会好起来的，意见建议：一般可以吃一些像慢炎舒宁冲剂，和这个阿莫西林，就可以达到治疗的效果就会好起来的。
问上下牙齿接触感觉不舒服
职称：医师
专长：传染科,尤其擅长乙肝等疾病
&&已帮助用户：219943
指导意见：主要考虑上火所致，目前可以采取去火药物治疗，其次平时多饮水，饮食要以清淡为主，不要吃刺激性食物。可考虑食疗去火，
用白糖水煮梨，食其汁肉。也可将新鲜的梨去皮，剖开去核，加入适量冰糖，放入锅中隔水蒸软即可
问喉咙发炎能拔牙吗？
职称：医生会员
专长：高血压、糖尿病、心血管疾病
&&已帮助用户：52978
病情分析：你好，最好是等咽炎好了这后，再拔牙，这样可以防止拔牙后感染
意见建议：
问咽喉部位有异物感，就是我手指所
职称：医师
专长：霉菌性***炎,宫颈糜烂,痛经
&&已帮助用户：243497
指导意见：你好、你的症状考虑是咽炎的症状的、有可能是感冒引起的、需要你到医院呼吸内科给予检查、确诊后给予对症治疗的、
建议针对你的这种病情你需要服用消炎药进行治疗、常用的药物有头孢类药物以及罗红霉素、口服润喉含片、饮食应依清淡为主;不抽 烟、喝酒、勿吃辛辣油炸类食物、如浓茶、咖啡、辣椒、巧克力、冷饮等;保证充足的睡眠、就寝之前不要吃太多东西;长时间讲话时、应多喝温开水保持咽喉部湿润、
问雾化吸入器治疗咽喉炎支气管哮喘
专长：女性不孕、子宫肌瘤、宫颈疾病
&&已帮助用户：219331
请根据提问仔细分析病情进行回答坚决不允许出现不针对性的回答问题你好一般来说是可以利用雾化吸入器来对咽喉部和肺部进行消炎化痰功效关键在于如何选择药物一般可以使用庆大霉素和地塞米松等药物每天1-2次连续做5-7天.估计是患者对庆大霉素过敏雾化时吸入的庆大霉素作为过敏原诱发了哮喘的发作或者患者气道的高反应性气道对吸入的雾状药液出现过强或过早的收缩反应导致哮喘发作
问表哥常年吸烟，久而久之患上了咽喉炎，这么...
职称：医师
专长：高血压、糖尿病、心血管疾病
&&已帮助用户：1740
病情分析：请根据提问仔细分析病情进行回答，坚决不允许出现不针对性的回答问题指导意见：你好！一般来说是可以利用雾化吸入器来对咽喉部和肺部进行消炎化痰功效，关键在于如何选择药物，一般可以使用庆大霉素和地塞米松等药物，每天1-2次，连续做5-7天.估计是患者对庆大霉素过敏，雾化时吸入的庆大霉素作为过敏原诱发了哮喘的发作，或者患者气道的高反应性，气道对吸入的雾状药液出现过强或过早的收缩反应导致哮喘发作。
关注此问题的人还看了
大家都在搜：
关注健康生活！
鼻粘膜损伤、鼻出血、鼻子常年干痛，促使精神萎靡、烦躁不安...
鼻炎、鼻过敏、有什么办法能缓解过敏性鼻炎的症状？
鼻塞、鼻涕、打喷嚏，鼻子堵着已严重影响工作和生活...
百度联盟推广
免费向百万名医生提问
填写症状 描述信息，如：小孩头不发烧，手脚冰凉，是怎么回事？
无需注册，10分钟内回答
搜狗联盟推广
百度联盟推广
医生在线咨询
评价成功！这种是什么情况？ - Padavan -
恩山无线论坛 -
Powered by Discuz!
后使用快捷导航没有帐号？
只需一步，快速开始
请完成以下验证码
请完成以下验证码
查看: 820|回复: 6
这种是什么情况？
本帖最后由 scucs 于
12:18 编辑
这种是什么情况？H大的padavan固件，CPU负载是0，平均负载是5.00，并且查看日志没有异常。@hiboyhiboyhiboy
QQ截图03.png (11.83 KB, 下载次数: 0)
11:47 上传
May 14 00:09:12 syslogd started: BusyBox v1.24.2
May 14 00:09:12 RT-N56U_B1: firmware version: 3.4.3.9-099_8-05-01
May 14 00:09:12 kernel: klogd started: BusyBox v1.24.2 ( 04:07:30 CST)
May 14 00:09:12 kernel: Linux version 3.4.113 () (gcc version 4.4.7 (GCC) ) #1 SMP Tue May 1 03:59:36 CST 2018
May 14 00:09:12 kernel: MediaTek SoC: MT7621A, RevID: 0103, RAM: DDR3, XTAL: 40MHz
May 14 00:09:12 kernel: CPU/OCP/SYS frequency: 880/293/220 MHz
May 14 00:09:12 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
May 14 00:09:12 kernel: Determined physical RAM map:
May 14 00:09:12 kernel:&&memory: 1c000000 (usable)
May 14 00:09:12 kernel: Zone PFN ranges:
May 14 00:09:12 kernel:& &Normal& &0x -& 0x
May 14 00:09:12 kernel: Movable zone start PFN for each node
May 14 00:09:12 kernel: Early memory PFN ranges
May 14 00:09:12 kernel:& &&&0: 0x -& 0x
May 14 00:09:12 kernel: On node 0 totalpages: 114688
May 14 00:09:12 kernel: free_area_init_node: node 0, pgdat 803f74a0, node_mem_map
May 14 00:09:12 kernel:& &Normal zone: 896 pages used for memmap
May 14 00:09:12 kernel:& &Normal zone: 0 pages reserved
May 14 00:09:12 kernel:& &Normal zone: 113792 pages, LIFO batch:31
May 14 00:09:12 kernel: Detected 3 available secondary CPU(s)
May 14 00:09:12 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
May 14 00:09:12 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
May 14 00:09:12 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
May 14 00:09:12 kernel: PERCPU: Embedded 7 pages/cpu @52 r u32768
May 14 00:09:12 kernel: pcpu-alloc: s d1 alloc=8*4096
May 14 00:09:12 kernel: pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3
May 14 00:09:12 kernel: Built 1 zonelists in Zone order, mobility grouping on.&&Total pages: 113792
May 14 00:09:12 kernel: Kernel command line: console=ttyS0, root=/dev/mtdblock4 rootfstype=squashfs
May 14 00:09:12 kernel: PID hash table entries: 2048 (order: 1, 8192 bytes)
May 14 00:09:12 kernel: Dentry cache hash table entries: 65536 (order: 6, 262144 bytes)
May 14 00:09:12 kernel: Inode-cache hash table entries: 32768 (order: 5, 131072 bytes)
May 14 00:09:12 kernel: Writing ErrCtl register=
May 14 00:09:12 kernel: Readback ErrCtl register=
May 14 00:09:12 kernel: Memory: 8752k available (3421k kernel code, 8524k reserved, 637k data, 224k init, 0k highmem)
May 14 00:09:12 kernel: Hierarchical RCU implementation.
May 14 00:09:12 kernel: NR_IRQS:72
May 14 00:09:12 kernel: MIPS GIC RevID: 3.0
May 14 00:09:12 kernel: Setting up vectored interrupts
May 14 00:09:12 kernel: console [ttyS0] enabled
May 14 00:09:12 kernel: Calibrating delay loop... 577.53 BogoMIPS (lpj=1155072)
May 14 00:09:12 kernel: pid_max: default: 32768 minimum: 301
May 14 00:09:12 kernel: Mount-cache hash table entries: 512
May 14 00:09:12 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
May 14 00:09:12 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
May 14 00:09:12 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
May 14 00:09:12 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
May 14 00:09:12 kernel: Synchronize counters for CPU 1: done.
May 14 00:09:12 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
May 14 00:09:12 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
May 14 00:09:12 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
May 14 00:09:12 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
May 14 00:09:12 kernel: Synchronize counters for CPU 2: done.
May 14 00:09:12 kernel: Primary instruction cache 32kB, VIPT, 4-way, linesize 32 bytes.
May 14 00:09:12 kernel: Primary data cache 32kB, 4-way, PIPT, no aliases, linesize 32 bytes
May 14 00:09:12 kernel: MIPS secondary cache 256kB, 8-way, linesize 32 bytes.
May 14 00:09:12 kernel: CPU revision is: 0001992f (MIPS 1004Kc)
May 14 00:09:12 kernel: Synchronize counters for CPU 3: done.
May 14 00:09:12 kernel: Brought up 4 CPUs
May 14 00:09:12 kernel: NET: Registered protocol family 16
May 14 00:09:12 kernel: PCIe2: no card, disable it (RST&CLK)
May 14 00:09:12 kernel: FPU Affinity set after 4664 emulations
May 14 00:09:12 kernel: bio: create slab &bio-0& at 0
May 14 00:09:12 kernel: SCSI subsystem initialized
May 14 00:09:12 kernel: libata version 3.00 loaded.
May 14 00:09:12 kernel: usbcore: registered new interface driver usbfs
May 14 00:09:12 kernel: usbcore: registered new interface driver hub
May 14 00:09:12 kernel: usbcore: registered new device driver usb
May 14 00:09:12 kernel: PCI host bridge to bus 0000:00
May 14 00:09:12 kernel: pci_bus 0000:00: root bus resource [mem 0xx6fffffff]
May 14 00:09:12 kernel: pci_bus 0000:00: root bus resource [io&&0x1ex1e16ffff]
May 14 00:09:12 kernel: pci .0: [0e8d:0801] type 01 class 0x060400
May 14 00:09:12 kernel: pci .0: reg 0x10: [mem 0xx7fffffff]
May 14 00:09:12 kernel: pci .0: supports D1
May 14 00:09:12 kernel: pci .0: PME# supported from D0 D1 D3hot
May 14 00:09:12 kernel: pci .0: [0e8d:0801] type 01 class 0x060400
May 14 00:09:12 kernel: pci .0: reg 0x10: [mem 0xx7fffffff]
May 14 00:09:12 kernel: pci .0: supports D1
May 14 00:09:12 kernel: pci .0: PME# supported from D0 D1 D3hot
May 14 00:09:12 kernel: pci .0: [14c3:7603] type 00 class 0x028000
May 14 00:09:12 kernel: pci .0: reg 0x10: [mem 0xx000fffff]
May 14 00:09:12 kernel: pci .0: PME# supported from D0 D3hot D3cold
May 14 00:09:12 kernel: pci .0: [14c3:7662] type 00 class 0x028000
May 14 00:09:12 kernel: pci .0: reg 0x10: [mem 0xx000fffff 64bit]
May 14 00:09:12 kernel: pci .0: reg 0x30: [mem 0xx0000ffff pref]
May 14 00:09:12 kernel: pci .0: PME# supported from D0 D3hot D3cold
May 14 00:09:12 kernel: pci .0: BAR 0: can't assign mem (size 0x)
May 14 00:09:12 kernel: pci .0: BAR 0: can't assign mem (size 0x)
May 14 00:09:12 kernel: pci .0: BAR 8: assigned [mem 0xx600fffff]
May 14 00:09:12 kernel: pci .0: BAR 8: assigned [mem 0xx601fffff]
May 14 00:09:12 kernel: pci .0: BAR 9: assigned [mem 0xx602fffff pref]
May 14 00:09:12 kernel: pci .0: BAR 0: assigned [mem 0xx600fffff]
May 14 00:09:12 kernel: pci .0: PCI bridge to [bus 01-01]
May 14 00:09:12 kernel: pci .0:& &bridge window [mem 0xx600fffff]
May 14 00:09:12 kernel: pci .0: BAR 0: assigned [mem 0xx601fffff 64bit]
May 14 00:09:12 kernel: pci .0: BAR 6: assigned [mem 0xx6020ffff pref]
May 14 00:09:12 kernel: pci .0: PCI bridge to [bus 02-02]
May 14 00:09:12 kernel: pci .0:& &bridge window [mem 0xx601fffff]
May 14 00:09:12 kernel: pci .0:& &bridge window [mem 0xx602fffff pref]
May 14 00:09:12 kernel: Switching to clocksource MIPS
May 14 00:09:12 kernel: NET: Registered protocol family 2
May 14 00:09:12 kernel: IP route cache hash table entries: 4096 (order: 2, 16384 bytes)
May 14 00:09:12 kernel: TCP established hash table entries: 16384 (order: 5, 131072 bytes)
May 14 00:09:12 kernel: TCP bind hash table entries: 16384 (order: 5, 131072 bytes)
May 14 00:09:12 kernel: TCP: Hash tables configured (established 16384 bind 16384)
May 14 00:09:12 kernel: TCP: reno registered
May 14 00:09:12 kernel: UDP hash table entries: 256 (order: 1, 8192 bytes)
May 14 00:09:12 kernel: NET: Registered protocol family 1
May 14 00:09:12 kernel: PCI: CLS 32 bytes, default 32
May 14 00:09:12 kernel: 4 CPUs re-calibrate udelay (lpj = 1167360)
May 14 00:09:12 kernel: squashfs: version 4.0 () Phillip Lougher
May 14 00:09:12 kernel: msgmni has been set to 879
May 14 00:09:12 kernel: io scheduler noop registered
May 14 00:09:12 kernel: io scheduler bfq registered (default)
May 14 00:09:12 kernel: BFQ I/O-scheduler version: v7r7
May 14 00:09:12 kernel: Serial:
driver, 1 ports, IRQ sharing disabled
May 14 00:09:12 kernel: serial8250: ttyS0 at MMIO 0x1e000c00 (irq = 34) is a 16550A
May 14 00:09:12 kernel: Ralink GPIO driver initialized. Number of GPIO: 64, GPIO mode: 000485AC
May 14 00:09:12 kernel: loop: module loaded
May 14 00:09:12 kernel: MediaTek SPI flash driver, SPI clock: 44MHz
May 14 00:09:12 kernel: SPI flash chip: GD25Q128CSIG (c8 ) (16384 Kbytes)
May 14 00:09:12 kernel: Creating 7 MTD partitions on &raspi&:
May 14 00:09:12 kernel: 0x-0x : &Bootloader&
May 14 00:09:12 kernel: 0x-0x : &Config&
May 14 00:09:12 kernel: 0x-0x : &Factory&
May 14 00:09:12 kernel: 0x-0x0 : &Kernel&
May 14 00:09:12 kernel: 0x0-0x00 : &RootFS&
May 14 00:09:12 kernel: 0x00-0x : &Storage&
May 14 00:09:12 kernel: 0x-0x00 : &Firmware_Stub&
May 14 00:09:12 kernel: tun: Universal TUN/TAP device driver, 1.6
May 14 00:09:12 kernel: tun: (C)
Max Krasnyansky &&
May 14 00:09:12 kernel: Ralink APSoC Ethernet Driver v3.2.4 (raeth)
May 14 00:09:12 kernel: raeth: PDMA RX ring 512, QDMA TX pool 1024. Max packet size 1536
May 14 00:09:12 kernel: raeth: NAPI & GRO support, weight 64
May 14 00:09:12 kernel: raeth: Byte Queue Limits (BQL) support
May 14 00:09:12 kernel: PPP generic driver version 2.4.2
May 14 00:09:12 kernel: PPP MPPE Compression module registered
May 14 00:09:12 kernel: NET: Registered protocol family 24
May 14 00:09:12 kernel: p p t p driver version 0.8.5
May 14 00:09:12 kernel: usbcore: registered new interface driver libusual
May 14 00:09:12 kernel: mtk-sd: MediaTek SD/MMC Card driver init
May 14 00:09:12 kernel: sdhci: Secure Digital Host Controller Interface driver
May 14 00:09:12 kernel: sdhci: Copyright(c) Pierre Ossman
May 14 00:09:12 kernel: sdhci-pltfm: SDHCI platform and OF driver helper
May 14 00:09:12 kernel: nf_conntrack version 0.5.0 (32768 buckets, 32768 max)
May 14 00:09:12 kernel: xt_time: kernel timezone is -0000
May 14 00:09:12 kernel: Bridge firewalling registered
May 14 00:09:12 kernel: gre: GRE over IPv4 demultiplexor driver
May 14 00:09:12 kernel: ip_tables: (C)
Netfilter Core Team
May 14 00:09:12 kernel: TCP: cubic registered
May 14 00:09:12 kernel: NET: Registered protocol family 10
May 14 00:09:12 kernel: ip6_tables: (C)
Netfilter Core Team
May 14 00:09:12 kernel: IPv6 over IPv4 tunneling driver
May 14 00:09:12 kernel: NET: Registered protocol family 17
May 14 00:09:12 kernel: L2TP core driver, V2.0
May 14 00:09:12 kernel: PPPoL2TP kernel driver, V2.0
May 14 00:09:12 kernel: 8021q: 802.1Q VLAN Support v1.8
May 14 00:09:12 kernel: ASUS NVRAM, v0.08. Available space: 61440. Integrity: OK
May 14 00:09:12 kernel: VFS: Mounted root (squashfs filesystem) readonly on device 31:4.
May 14 00:09:12 kernel: Freeing unused kernel memory: 224k freed
May 14 00:09:12 kernel: Algorithmics/MIPS FPU Emulator v1.5
May 14 00:09:12 kernel: PCI: Enabling device .0 (0000 -& 0002)
May 14 00:09:12 kernel: MT76x2 AP Driver version: 3.0.5.0
May 14 00:09:12 kernel: PCI: Enabling device .0 (0000 -& 0002)
May 14 00:09:12 kernel: MT7603 AP Driver version: 4.1.0.0_pre
May 14 00:09:12 kernel: usbcore: registered new interface driver usblp
May 14 00:09:12 kernel: Initializing USB Mass Storage driver...
May 14 00:09:12 kernel: usbcore: registered new interface driver usb-storage
May 14 00:09:12 kernel: USB Mass Storage support registered.
May 14 00:09:12 kernel: U2PHY P0 set SRCTRL calibration value: 2
May 14 00:09:12 kernel: U2PHY P1 set SRCTRL calibration value: 2
May 14 00:09:12 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
May 14 00:09:12 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 1
May 14 00:09:12 kernel: xhci-hcd xhci-hcd: irq 30, io mem 0x1e1c0000
May 14 00:09:12 kernel: usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
May 14 00:09:12 kernel: usb usb1: Product: xHCI Host Controller
May 14 00:09:12 kernel: usb usb1: Manufacturer: Linux 3.4.113 xhci-hcd
May 14 00:09:12 kernel: usb usb1: SerialNumber: xhci-hcd
May 14 00:09:12 kernel: xHCI xhci_add_endpoint called for root hub
May 14 00:09:12 kernel: xHCI xhci_check_bandwidth called for root hub
May 14 00:09:12 kernel: hub 1-0:1.0: USB hub found
May 14 00:09:12 kernel: hub 1-0:1.0: 2 ports detected
May 14 00:09:12 kernel: xhci-hcd xhci-hcd: xHCI Host Controller
May 14 00:09:12 kernel: xhci-hcd xhci-hcd: new USB bus registered, assigned bus number 2
May 14 00:09:12 kernel: usb usb2: New USB device found, idVendor=1d6b, idProduct=0003
May 14 00:09:12 kernel: usb usb2: Product: xHCI Host Controller
May 14 00:09:12 kernel: usb usb2: Manufacturer: Linux 3.4.113 xhci-hcd
May 14 00:09:12 kernel: usb usb2: SerialNumber: xhci-hcd
May 14 00:09:12 kernel: xHCI xhci_add_endpoint called for root hub
May 14 00:09:12 kernel: xHCI xhci_check_bandwidth called for root hub
May 14 00:09:12 kernel: hub 2-0:1.0: USB hub found
May 14 00:09:12 kernel: hub 2-0:1.0: 1 port detected
May 14 00:09:12 kernel: raeth: HW IP/TCP/UDP checksum RX/TX offload enabled
May 14 00:09:12 kernel: raeth: HW VLAN RX offload enabled
May 14 00:09:12 kernel: raeth: HW VLAN TX offload enabled
May 14 00:09:12 kernel: raeth: HW Scatter/Gather TX offload enabled
May 14 00:09:12 kernel: raeth: HW TCP segmentation offload (TSO) enabled
May 14 00:09:12 kernel: usb 1-2: new high-speed USB device number 2 using xhci-hcd
May 14 00:09:12 kernel: mtk_esw - hw bridge: W|LLLL
May 14 00:09:12 kernel: mtk_esw - 802.3az EEE: on
May 14 00:09:12 kernel: mtk_esw - set broadcast storm control rate as: 10 mbps
May 14 00:09:12 kernel: device eth2 entered promiscuous mode
May 14 00:09:12 kernel: usb 1-2: New USB device found, idVendor=0781, idProduct=5597
May 14 00:09:12 kernel: usb 1-2: Product: Cruzer Glide 3.0
May 14 00:09:12 kernel: usb 1-2: Manufacturer: SanDisk
May 14 00:09:12 kernel: usb 1-2: SerialNumber: 4C103014
May 14 00:09:12 kernel: scsi0 : usb-storage 1-2:1.0
May 14 00:09:14 kernel:&&ch149 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:14 kernel: =====================================================
May 14 00:09:14 kernel: Channel 149 : Dirty = 80, False CCA = 7, Busy Time = 0, Skip Channel = FALSE
May 14 00:09:14 kernel: Channel 153 : Dirty = 32, False CCA = 4, Busy Time = 0, Skip Channel = FALSE
May 14 00:09:14 kernel: Channel 157 : Dirty = 0, False CCA = 1, Busy Time = 0, Skip Channel = FALSE
May 14 00:09:14 kernel: Channel 161 : Dirty = 0, False CCA = 964, Busy Time = 0, Skip Channel = FALSE
May 14 00:09:14 kernel: Channel 165 : Dirty = 0, False CCA = 8, Busy Time = 0, Skip Channel = TRUE
May 14 00:09:14 kernel: =====================================================
May 14 00:09:14 kernel: Rule 3 CCA value : Randomly Select ==& Select Channel 165
May 14 00:09:14 kernel: device rai0 entered promiscuous mode
May 14 00:09:15 net_wifi.c: iwpriv rai0 set KickStaRssiLow=-80
May 14 00:09:15 net_wifi.c: iwpriv rai0 set AssocReqRssiThres=-80
May 14 00:09:15 kernel: mtk_esw: Link Status Changed - Port WAN Link Up
May 14 00:09:15 kernel: scsi 0:0:0:0: Direct-Access& &&&SanDisk&&Cruzer Glide 3.0 1.00 PQ: 0 ANSI: 6
May 14 00:09:15 kernel: sd 0:0:0:0: [sda] 2-byte logical blocks: (63.0 GB/58.7 GiB)
May 14 00:09:15 kernel: sd 0:0:0:0: [sda] Write Protect is off
May 14 00:09:15 kernel: sd 0:0:0:0: [sda] Mode Sense: 43 00 00 00
May 14 00:09:15 kernel: sd 0:0:0:0: Attached scsi generic sg0 type 0
May 14 00:09:15 kernel: sd 0:0:0:0: [sda] Write cache: disabled, read cache: enabled, doesn't support DPO or FUA
May 14 00:09:15 kernel:&&sda: sda1
May 14 00:09:15 kernel: sd 0:0:0:0: [sda] Attached SCSI removable disk
May 14 00:09:15 usb_modeswitch: no rule for device
May 14 00:09:15 automount: /sbin/automount.sh sda1& & AiDisk_a1
May 14 00:09:15 automount: mount&&device /dev/sda1 (ext4) to /media/AiDisk_a1
/media/AiDisk_a1
May 14 00:09:15 kernel: MT7603 Andes FW Version: ap_pcie
May 14 00:09:15 kernel: MT7603 Andes FW Build Date: 55
May 14 00:09:16 kernel: EXT4-fs (sda1): mounted filesystem with ordered data mode. Opts: (null)
May 14 00:09:16 opt-mount.sh: started [/dev/sda1 /media/AiDisk_a1]
May 14 00:09:18 kernel:&&ch1 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch1 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch1 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch5 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch6 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch8 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch9 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch10 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel:&&ch11 bssid=xx:xx:xx:xx:xx:xx
May 14 00:09:18 kernel: =====================================================
May 14 00:09:18 kernel: Channel 1 : Dirty = 258, False CCA = 0, Busy Time = 4620, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 2 : Dirty = 156, False CCA = 0, Busy Time = 3662, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 3 : Dirty = 164, False CCA = 0, Busy Time = 3653, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 4 : Dirty = 172, False CCA = 0, Busy Time = 1371, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 5 : Dirty = 244, False CCA = 0, Busy Time = 1808, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 6 : Dirty = 200, False CCA = 0, Busy Time = 1656, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 7 : Dirty = 164, False CCA = 0, Busy Time = 2582, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 8 : Dirty = 206, False CCA = 0, Busy Time = 2625, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 9 : Dirty = 216, False CCA = 0, Busy Time = 1997, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 10 : Dirty = 182, False CCA = 0, Busy Time = 3031, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 11 : Dirty = 154, False CCA = 0, Busy Time = 1648, Skip Channel = FALSE
May 14 00:09:18 kernel: Channel 12 : Dirty = 104, False CCA = 0, Busy Time = 1076, Skip Channel = TRUE
May 14 00:09:18 kernel: Channel 13 : Dirty = 72, False CCA = 0, Busy Time = 924, Skip Channel = TRUE
May 14 00:09:18 kernel: =====================================================
May 14 00:09:18 kernel: Rule 1 CCA value : Min Dirtiness (Include extension channel) ==& Select Channel 9
May 14 00:09:18 kernel: Min Dirty = 944
May 14 00:09:18 kernel: ExChannel = 0 , 0
May 14 00:09:18 kernel: BW& && &&&= 40
May 14 00:09:19 kernel: device ra0 entered promiscuous mode
May 14 00:09:19 kernel: device ra1 entered promiscuous mode
May 14 00:09:19 net_wifi.c: iwpriv ra0 set KickStaRssiLow=-80
May 14 00:09:19 net_wifi.c: iwpriv ra0 set AssocReqRssiThres=-80
May 14 00:09:20 kernel: br0: port 4(ra1) entered forwarding state
May 14 00:09:20 kernel: br0: port 3(ra0) entered forwarding state
May 14 00:09:20 kernel: br0: port 2(rai0) entered forwarding state
May 14 00:09:20 kernel: br0: port 1(eth2) entered forwarding state
May 14 00:09:20 kernel: mtk_esw - software IGMP/MLD snooping: 1
May 14 00:09:20 dnsmasq[573]: started, version 2.78 cachesize 1536
May 14 00:09:20 dnsmasq[573]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:09:20 dnsmasq-dhcp[573]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:09:20 dnsmasq-dhcp[573]: DHCP, sockets bound exclusively to interface br0
May 14 00:09:20 dnsmasq[573]: read /etc/hosts - 8 addresses
May 14 00:09:20 dnsmasq[573]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:09:20 dnsmasq-dhcp[573]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:09:20 kernel: eth3: ===& VirtualIF_open
May 14 00:09:20 kernel: Ralink HW NAT v2.52.0 Module Enabled, FoE Size: 16384
May 14 00:09:20 RT-N56U_B1: Hardware NAT/Routing: Enabled, IPoE/PPPoE offload [WAN]&-&[LAN/WLAN]
May 14 00:09:20 RT-N56U_B1: Hardware NAT/Routing: IPv4 UDP flow offload - ON
May 14 00:09:20 RT-N56U_B1: Hardware NAT/Routing: IPv6 routes offload - OFF
May 14 00:09:20 DHCP MAN Client: starting on eth3 ...
May 14 00:09:20 【WebUI】: 稍等后启动相关设置
May 14 00:09:20 【QOS】: QOS 没有开启或闪存不足缺模块
May 14 00:09:20 crond[674]: crond (busybox 1.24.2) started, log level 8
May 14 00:09:20 【防火墙规则】: 脚本完成
May 14 00:09:20 ppp: lcp-echo is off
May 14 00:09:20 pppd[685]: Plugin rp-pppoe.so loaded.
May 14 00:09:20 pppd[685]: RP-PPPoE plugin version 3.12 compiled against pppd 2.4.7
May 14 00:09:20 pppd[686]: pppd 2.4.7 started by admin, uid 0
May 14 00:09:21 pppd[686]: PPP session is 3ea0)
May 14 00:09:21 pppd[686]: Connected to xx:xx:xx:xx:xx:xx via interface eth3
May 14 00:09:21 pppd[686]: Using interface ppp0
May 14 00:09:21 pppd[686]: Connect: ppp0 &--& eth3
May 14 00:09:21 pppd[686]: syncppp not active
May 14 00:09:21 pppd[686]: Remote message: Authentication Successful,Welcome!
May 14 00:09:21 pppd[686]: PAP authentication succeeded
May 14 00:09:21 pppd[686]: peer from calling number xx:xx:xx:xx:xx:xx authorized
May 14 00:09:21 httpd[691]: Server listening port 80 (HTTP).
May 14 00:09:21 pppd[686]: local&&IP address 115.198.47.186
May 14 00:09:21 pppd[686]: remote IP address 115.198.40.1
May 14 00:09:21 pppd[686]: primary& &DNS address 202.101.172.35
May 14 00:09:21 pppd[686]: secondary DNS address 202.101.172.47
May 14 00:09:21 RT-N56U_B1: WAN up (ppp0)
May 14 00:09:21 dnsmasq[573]: read /etc/hosts - 8 addresses
May 14 00:09:21 dnsmasq[573]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:09:21 dnsmasq-dhcp[573]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:09:21 admin: 运行后 WAN 状态: WAN 状态:【up】, WAN 接口:【ppp0】, WAN IP:【xx.xx.xx.xx】
May 14 00:09:21 【opt】: opt 没挂载，重新挂载
May 14 00:09:21 dropbear[730]: Running in background
May 14 00:09:21 【opt】: /media/AiDisk_a1/opt文件夹模式挂载/opt
May 14 00:09:21 miniupnpd[751]: version 2.0 starting NAT-PMP/PCP UPnP-IGD ext if ppp0 BOOTID=
May 14 00:09:21 miniupnpd[751]: HTTP listening on port 40598
May 14 00:09:21 miniupnpd[751]: Listening for NAT-PMP/PCP traffic on port 5351
May 14 00:09:21 【opt】: opt 挂载正常：/dev/sda1
May 14 00:09:21 kernel: Netfilter messages via NETLINK v0.30.
May 14 00:09:21 kernel: ip_set: protocol 6
May 14 00:09:21 【WebUI】: 稍等后启动相关设置
May 14 00:09:21 【QOS】: QOS 没有开启或闪存不足缺模块
May 14 00:09:21 【防火墙规则】: 脚本完成
May 14 00:09:21 crond[905]: crond (busybox 1.24.2) started, log level 8
May 14 00:09:22 kernel: br0: port 4(ra1) entered forwarding state
May 14 00:09:22 kernel: br0: port 3(ra0) entered forwarding state
May 14 00:09:22 kernel: br0: port 2(rai0) entered forwarding state
May 14 00:09:22 kernel: br0: port 1(eth2) entered forwarding state
May 14 00:09:27 nmbd[1804]: [ 00:09:27, 0] libsmb/namequery.c:getlmhostsent(782)
May 14 00:09:27 nmbd[1804]:& &getlmhostsent: group flag in lmhosts ignored (obsolete)
May 14 00:09:27 Samba Server: daemon is started
May 14 00:09:28 Transmission: daemon is started
May 14 00:09:29 Aria2: 找到 /usr/bin/aria2c
May 14 00:09:29 Aria2: daemon is started
May 14 00:09:30 【WebUI】: 稍等后启动相关设置
May 14 00:09:30 【QOS】: QOS 没有开启或闪存不足缺模块
May 14 00:09:30 【防火墙规则】: 脚本完成
May 14 00:09:30 crond[1987]: crond (busybox 1.24.2) started, log level 8
May 14 00:09:30 opt-start.sh: call /opt/etc/init.d
May 14 00:09:31 NTP Client: Synchronizing time to ntp1.aliyun.com.
May 14 00:09:51 NTP Client: System time changed, offset: 19.084435s
May 14 00:09:52 nmbd[2053]: [ 00:09:52, 0] libsmb/namequery.c:getlmhostsent(782)
May 14 00:09:52 nmbd[2053]:& &getlmhostsent: group flag in lmhosts ignored (obsolete)
May 14 00:09:53 Samba Server: daemon is started
May 14 00:09:56 【自定义脚本0】: 脚本完成
May 14 00:09:56 【DDNS】: 更新 IP 地址-/tmp/3322ddns.log
May 14 00:09:56 dnsmasq[573]: exiting on receipt of SIGTERM
May 14 00:09:56 dnsmasq[2096]: started, version 2.78 cachesize 1536
May 14 00:09:56 dnsmasq[2096]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:09:56 dnsmasq-dhcp[2096]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:09:56 dnsmasq-dhcp[2096]: DHCP, sockets bound exclusively to interface br0
May 14 00:09:56 dnsmasq[2096]: read /etc/hosts - 8 addresses
May 14 00:09:56 dnsmasq[2096]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:09:56 dnsmasq-dhcp[2096]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:09:57 【网络检测】: 互联网状态:12, 经过时间:ts.
May 14 00:09:57 【连接 AP】: 12秒后, 自动搜寻 ap
May 14 00:10:00 watchdog: process of kms is missing, start again!
May 14 00:10:00 dnsmasq[2096]: exiting on receipt of SIGTERM
May 14 00:10:00 dnsmasq[2124]: started, version 2.78 cachesize 1536
May 14 00:10:00 dnsmasq[2124]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:10:00 dnsmasq-dhcp[2124]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:10:00 dnsmasq-dhcp[2124]: DHCP, sockets bound exclusively to interface br0
May 14 00:10:00 dnsmasq[2124]: read /etc/hosts - 8 addresses
May 14 00:10:00 dnsmasq[2124]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:10:00 dnsmasq-dhcp[2124]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:10:09 【连接 AP】: 脚本完成
May 14 00:10:09 【script】: 脚本检查更新
May 14 00:10:10 PPPoE: Connected
May 14 00:10:10 pppd[686]: System time change detected.
May 14 00:10:10 【WebUI】: 稍等后启动相关设置
May 14 00:10:10 【ping1】: 127.0.0.1
May 14 00:10:10 【ping1】: 0 ms
May 14 00:10:10 crond[2276]: crond (busybox 1.24.2) started, log level 8
May 14 00:10:11 【script】: 脚本已经最新
May 14 00:10:11 【opt】: opt 挂载正常：/media/AiDisk_a1
May 14 00:10:12 【libmd5_恢复】: 正在对比 /opt/lib/ 文件 md5
May 14 00:10:47 【libmd5_恢复】: md5对比，完成！
May 14 00:10:48 Aria2: 找到 /usr/bin/aria2c
May 14 00:10:50 Aria2: 找到 /usr/bin/aria2c
May 14 00:10:51 Aria2: daemon is started
May 14 00:10:52 transmission-daemon[1832]: Closing session
May 14 00:10:52 Transmission: daemon is started
May 14 00:10:53 [LNMP]: start
May 14 00:10:53 [LNMP-mysqld]: start
May 14 00:10:53 [LNMP-mysqld]: stop
May 14 00:10:53 [LNMP-php-fpm]: start
May 14 00:10:53 [LNMP-php-fpm]: stop
May 14 00:10:53 [LNMP-nginx]: start
May 14 00:10:53 [LNMP-nginx]: stop
May 14 00:10:53 [shellinabox]: start
May 14 00:10:53 [shellinabox]: stop
May 14 00:10:53 admin: Started lcd4linux from .
May 14 00:10:53 【自定义脚本】: 脚本完成
May 14 00:10:53 【运行路由器启动后】: 脚本完成
May 14 00:10:53 LCD4Linux[14015]: stat(/etc/storage/display_lcd4linux_script.sh) failed: No such file or directory
May 14 00:10:53 LCD4Linux[14015]: Error reading configuration. Exit!
May 14 00:10:53 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.97, MAC: xx:xx:xx:xx:xx:xx!
May 14 00:10:53 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.27, MAC: xx:xx:xx:xx:xx:xx!
May 14 00:10:53 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.101, MAC: xx:xx:xx:xx:xx:xx!
May 14 00:10:53 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.205, MAC: xx:xx:xx:xx:xx:xx!
May 14 00:10:53 【自定义脚本0】: 脚本完成
May 14 00:10:53 【DDNS】: 更新 IP 地址-/tmp/3322ddns.log
May 14 00:10:53 【WebUI】: UI 开关遍历状态监测
May 14 00:10:53 【QOS】: QOS 没有开启或闪存不足缺模块
May 14 00:10:53 【防火墙规则】: 脚本完成
May 14 00:10:56 【opt】: opt 挂载正常：/media/AiDisk_a1
May 14 00:10:58 【kcptun】: 找到 /opt/bin/client_linux_mips
May 14 00:10:58 【kcptun】: kcptun-version:
May 14 00:10:58 【kcptun】: 运行 kcptun_script
May 14 00:10:58 dnsmasq[2124]: exiting on receipt of SIGTERM
May 14 00:10:58 dnsmasq[15428]: started, version 2.78 cachesize 1536
May 14 00:10:58 dnsmasq[15428]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:10:58 dnsmasq-dhcp[15428]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:10:58 dnsmasq-dhcp[15428]: DHCP, sockets bound exclusively to interface br0
May 14 00:10:58 dnsmasq[15428]: read /etc/hosts - 8 addresses
May 14 00:10:58 dnsmasq[15428]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:10:58 dnsmasq-dhcp[15428]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:11:02 【kcptun】: 启动成功
May 14 00:11:02 【kcptun】: 守护进程启动
May 14 00:11:02 crond[15674]: crond (busybox 1.24.2) started, log level 8
May 14 00:11:02 dnsmasq[15428]: exiting on receipt of SIGTERM
May 14 00:11:02 dnsmasq[15692]: started, version 2.78 cachesize 1536
May 14 00:11:02 dnsmasq[15692]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:11:02 dnsmasq-dhcp[15692]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:11:02 dnsmasq-dhcp[15692]: DHCP, sockets bound exclusively to interface br0
May 14 00:11:02 dnsmasq[15692]: read /etc/hosts - 8 addresses
May 14 00:11:02 dnsmasq[15692]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:11:02 dnsmasq-dhcp[15692]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:11:03 【SS】: 启动 SS
May 14 00:11:03 【SS】: ###############启动程序###############
May 14 00:11:03 【SS】: 启动 dnsproxy 防止域名污染
May 14 00:11:03 DNSPROXY[15799]: runing at 8053, cache: on, transport to 8.8.8.8:53
May 14 00:11:03 dnsmasq[15692]: exiting on receipt of SIGTERM
May 14 00:11:03 dnsmasq[15809]: started, version 2.78 cachesize 1536
May 14 00:11:03 dnsmasq[15809]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:11:03 dnsmasq-dhcp[15809]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:11:03 dnsmasq-dhcp[15809]: DHCP, sockets bound exclusively to interface br0
May 14 00:11:03 dnsmasq[15809]: read /etc/hosts - 8 addresses
May 14 00:11:03 dnsmasq[15809]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:11:03 dnsmasq-dhcp[15809]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:11:03 【ss-redir】: 启动所有的 SS 连线, 出现的 SS 日志并不是错误报告, 只是使用状态日志, 请不要慌张, 只要系统正常你又看不懂就无视它！
May 14 00:11:03 【SS】: SS服务器1 设置内容：127.0.0.1 端口:xxxxx 加密方式:xxxxxx
May 14 00:11:05 【SS】: 启动成功
May 14 00:11:06 kernel: NF_TPROXY: Transparent proxy support initialized, version 4.1.0
May 14 00:11:06 kernel: NF_TPROXY: Copyright (c)
BalaBit IT Ltd.
May 14 00:11:06 【SS】: 设置 SS 的防火墙规则
May 14 00:11:06 【SS】: 出国模式
May 14 00:11:06 【SS】: 设置内网(LAN)访问控制
May 14 00:11:06 【SS】: udp53端口（DNS）地址重定向为 192.168.100.1 强制使用重定向地址的DNS
May 14 00:11:06 【SS】: DNS程序 0 模式: 0 【0走代理 1直连】
May 14 00:11:06 【SS】: 外网(WAN)访问控制，设置 WAN IP 转发或忽略代理中转
May 14 00:11:07 【SS】: 完成 SS 转发规则设置
May 14 00:11:07 【SS】: 正在处理 gfwlist 列表，此时 SS 未能使用，请稍候....
May 14 00:11:07 dnsmasq[15809]: exiting on receipt of SIGTERM
May 14 00:11:07 dnsmasq[16228]: started, version 2.78 cachesize 1536
May 14 00:11:07 dnsmasq[16228]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:11:07 dnsmasq-dhcp[16228]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:11:07 dnsmasq-dhcp[16228]: DHCP, sockets bound exclusively to interface br0
May 14 00:11:07 dnsmasq[16228]: read /etc/hosts - 8 addresses
May 14 00:11:07 dnsmasq[16228]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:11:07 dnsmasq-dhcp[16228]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:11:07 【SS】: 启动时使用 固件内置list规则 列表....
May 14 00:11:08 【SS】: GFWlist 规则 10316 行&&ss-redir stop.
May 14 00:11:08 【SS】: 所有规则处理完毕，SS即将开始工作
May 14 00:11:08 【SS】: GFWlist规则目录：/tmp/ss/dnsmasq.d
May 14 00:11:08 dnsmasq: restart adbyby_cflist
May 14 00:11:08 【SS】: GFWList update 重启 dnsmasq 更新列表
May 14 00:11:08 dnsmasq[16228]: exiting on receipt of SIGTERM
May 14 00:11:08 dnsmasq[16347]: started, version 2.78 cachesize 1536
May 14 00:11:08 dnsmasq[16347]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:11:08 dnsmasq-dhcp[16347]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:11:08 dnsmasq-dhcp[16347]: DHCP, sockets bound exclusively to interface br0
May 14 00:11:08 dnsmasq[16347]: using 5127 more nameservers
May 14 00:11:08 dnsmasq[16347]: read /etc/hosts - 8 addresses
May 14 00:11:08 dnsmasq[16347]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:11:08 dnsmasq-dhcp[16347]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:11:08 【SS】: 启动时使用 固件内置chnroutes规则 列表....
May 14 00:11:08 dnsmasq[16347]: using 5129 more nameservers
May 14 00:11:10 【SS】: chnroutes update 重启 dnsmasq 更新列表
May 14 00:11:10 dnsmasq[16347]: exiting on receipt of SIGTERM
May 14 00:11:10 dnsmasq[16383]: started, version 2.78 cachesize 1536
May 14 00:11:10 dnsmasq[16383]: compile time options: IPv6 GNU-getopt no-RTC no-DBus no-i18n no-IDN DHCP DHCPv6 no-Lua TFTP no-conntrack ipset no-auth no-DNSSEC no-loop-detect no-inotify
May 14 00:11:10 dnsmasq-dhcp[16383]: DHCP, IP range 192.168.100.2 -- 192.168.100.244, lease time 1d
May 14 00:11:10 dnsmasq-dhcp[16383]: DHCP, sockets bound exclusively to interface br0
May 14 00:11:10 dnsmasq[16383]: using 5127 more nameservers
May 14 00:11:10 【SS】: SS 检查网络连接
May 14 00:11:10 dnsmasq[16383]: read /etc/hosts - 8 addresses
May 14 00:11:10 dnsmasq[16383]: read /etc/storage/dnsmasq/hosts - 0 addresses
May 14 00:11:10 dnsmasq-dhcp[16383]: read /etc/dnsmasq/dhcp/dhcp-hosts.rc
May 14 00:11:10 dnsmasq[16383]: using 5129 more nameservers
May 14 00:11:11 【ss-redir】: check_network 检查 Google.com : 200
May 14 00:11:11 【SS】: SS 启动成功
May 14 00:11:11 【SS】: 启动后若发现一些网站打不开, 估计是 DNS 被污染了. 解决 DNS 被污染方法：
May 14 00:11:11 【SS】: ①路由 SS 设置选择其他 DNS 服务模式；
May 14 00:11:11 【SS】: ②电脑设置 DNS 自动获取路由 ip。检查 hosts 是否有错误规则。
May 14 00:11:11 【SS】: ③电脑运行 cmd 输入【ipconfig /flushdns】, 清理浏览器缓存。
May 14 00:11:11 【SS】: s-s 进程守护启动
May 14 00:11:11 【ss】: 规则自动更新关闭状态，不启用自动更新...
May 14 00:11:14 【迅雷下载】: 启动程序
May 14 00:11:14 crond[17823]: crond (busybox 1.24.2) started, log level 8
May 14 00:11:21 【迅雷下载】: 启动成功
May 14 00:11:36 【迅雷下载】: 启动 xunlei, 绑定设备页面【】
May 14 00:11:36 【迅雷下载】: 在浏览器中输入【】
May 14 00:11:36 【迅雷下载】: 显示错误则输入【】
May 14 00:11:36 【迅雷下载】: 会看到类似如下信息：
May 14 00:11:36 【迅雷下载】: [0,1,1,1,&&,1,&x.xxx.x.xxx&,&xxxxxx&,1,&xxxxxxxxx&,0]
May 14 00:11:36 【迅雷下载】: 其中有用的几项为：
May 14 00:11:36 【迅雷下载】: ①: 0表示返回结果成功
May 14 00:11:36 【迅雷下载】: ②: 1表示检测网络正常, 0表示检测网络异常
May 14 00:11:36 【迅雷下载】: ④: 1表示已绑定成功, 0表示未绑定
May 14 00:11:36 【迅雷下载】: ⑤: 未绑定的情况下, 为绑定的需要的激活码
May 14 00:11:36 【迅雷下载】: ⑥: 1表示磁盘挂载检测成功, 0表示磁盘挂载检测失败
May 14 00:11:36 【迅雷下载】: 如果出现错误可以手动启动, 输入以下命令测试
May 14 00:11:36 【迅雷下载】: export LD_LIBRARY_PATH=/media/AiDisk_a1/xunlei/lib:/lib:/opt/ cd /media/AiDisk_a1/ /media/AiDisk_a1/xunlei/portal
May 14 00:11:36 【迅雷下载】: 守护进程启动 /media/AiDisk_a1/xunlei
May 14 01:04:24 bwmon[14029]: Found new hostname:XxxxxxxXX IP:192.168.100.205
May 14 01:07:24 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.224, MAC: xx:xx:xx:xx:xx:xx!
May 14 05:42:56 dnsmasq[16383]: nameserver 127.0.0.1 refused to do a recursive query
May 14 21:34:00 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.78, MAC: xx:xx:xx:xx:xx:xx!
May 15 00:09:50 NTP Client: Synchronizing time to time.nist.gov.
May 15 02:17:22 dnsmasq[16383]: nameserver 127.0.0.1 refused to do a recursive query
May 15 22:20:31 dnsmasq[16383]: nameserver 127.0.0.1 refused to do a recursive query
May 15 22:29:38 dnsmasq[16383]: nameserver 127.0.0.1 refused to do a recursive query
May 16 10:45:35 dnsmasq[16383]: nameserver 127.0.0.1 refused to do a recursive query
May 17 01:03:37 dnsmasq[16383]: nameserver 127.0.0.1 refused to do a recursive query
May 17 10:39:32 bwmon[14029]: XXXXXXX join your network: IP: 192.168.100.95, MAC: xx:xx:xx:xx:xx:xx!
我的恩山、我的无线
The best wifi forum is right here.
QQ截图02.png (14.18 KB, 下载次数: 0)
17:41 上传
负载越来越高了。
我的恩山、我的无线
The best wifi forum is right here.
出现过，一般重启就好了。
软重启已经无法重启了。点了之后重启界面出来，但进度条走完，依然没有重启，开机时间并没有变零。&
我的恩山、我的无线
The best wifi forum is right here.
出现过，一般重启就好了。
软重启已经无法重启了。点了之后重启界面出来，但进度条走完，依然没有重启，开机时间并没有变零。
我倒是软重启可以的，这种现象很少出现，也没太在意。&
我的恩山、我的无线
The best wifi forum is right here.
强制重启试试。如果重新开机后情况依旧，那么进ssh，输入命令“htop”来查看到底是哪个进程卡住了。
如果看到哪个进程一直CPU跑100%，那么截图后联系hiboy解决bug。
只有拔电源重启。
另外，不存在CPU占用率高的情况。CPU占用率不超过1%，但负载不低于5。&
我的恩山、我的无线
The best wifi forum is right here.
软重启已经无法重启了。点了之后重启界面出来，但进度条走完，依然没有重启，开机时间并没有变零。
我倒是软重启可以的，这种现象很少出现，也没太在意。
我的恩山、我的无线
The best wifi forum is right here.
xx666 发表于
强制重启试试。如果重新开机后情况依旧，那么进ssh，输入命令“htop”来查看到底是哪个进程卡住了。
只有拔电源重启。
另外，不存在CPU占用率高的情况。CPU占用率不超过1%，但负载不低于5。
我的恩山、我的无线
The best wifi forum is right here.
Powered by