Cookies help us deliver our services. By using this platform, you agree to our use of cookies.
FIRST TIME?
Watch a short video to learn how to register & visit our catalog!
FASHION ACCESSORIES
WOMEN CLOTHING
Main Payment Methods:
Share This
This B2B Electronic Commerce platform is for Wholesale buyers only (shops, boutiques, resellers, wholesalers, etc ...) and registration is required.
If you already registered with the ItalianModa marketplace or with another catalog, you can enter the same username & password, then confirm quickly your data.
Use your Email address as Username
Keep me signed in
ENTER CATALOG
Registering allows to enter our Catalog, place orders and get news about products and offers.
It takes less than one minute!
Registering allows to enter our Catalog, place orders and get news about products and offers.
It takes less than one minute!
Find Products
Share our Catalog
Moda Catalog Technology by
- All Rights Reserved51invitrog逆转录试剂盒说明书
上亿文档资料，等你来发现
51invitrog逆转录试剂盒说明书
ThermoScript?RT-PCRSyste；Catalognos.(25reactions)；(w/Platinum?Taq；Description；TheThermoScript?RT-PCRSy；producehigheryieldsofcDN；Catalognos.(100reactions；(w/Platin
ThermoScript? RT-PCR System Catalog nos. (25 reactions):
(w/ Platinum? Taq DNA polymerase)
Description The ThermoScript? RT-PCR System is designed for the sensitive and reproducible detection and analysis of RNA molecules in a two-step process. ThermoScript? RT, an avian reverse transcriptase with reduced RNase H activity, is engineered to have higher thermal stability, produce higher yields of cDNA, and produce more full-length cDNA transcripts than AMV RT. cDNA synthesis is performed in the first step using either total RNA or poly(A)+-selected RNA primed with oligo(dT), random primers or a gene-specific primer, at 50-65°C.
In the second step, PCR is performed in a separate tube using primers specific for the gene of interest. RNA targets from 100 bp to >12 kb can be detected with this system, using 10 pg to 5 Yg of total RNA. PCR is carried out with Platinum? Taq DNA Polymerase or Platinum? Taq DNA Polymerase High Fidelity. Platinum? Taq DNA Polymerase High Fidelity is suitable for templates from 100 bp to >12 kb. Platinum? Taq DNA polymerase (1) provides automatic hot-start conditions for increased specificity up to 3 kb. Catalog nos. (100 reactions):
(w/ Platinum? Taq DNA polymerase)
(w/ Platinum? Taq DNA polymerase High Fidelity) Store at -20°C (stability can be extended by storing at -70°C)
Reagents are provided for 25 or 100 cDNA synthesis reactions of 20 μl each and 25 or 100 amplification reactions of 50 μl each.
Catalog numbers
(25 rxns) and
(100 rxns) include the following, in addition to the components to the left: Component 25 rxn kit 100 rxn kit Component 25 rxn kit 100 rxn kit ??ThermoScript RT (15 U/Yl)
25 μl 100 μl Platinum Taq DNA polymerase (5 U/Yl) 100 units 250 units 5X cDNA Synthesis Buffer* 500 μl 500 μl 10X PCR buffer Minus Mg 1.0 ml 1.0 ml 0.1 M DTT 250 μl 250 μl 50 mM MgCl2
1.0 ml 1.0 ml 10 mM dNTP Mix 100 μl 2 × 250 μl Catalog number
(100 rxns) includes the following, in RNaseOUT? (40 U/Yl) 25 μl 100 μl addition to the components to the left: Oligo (dT)20 (50 YM) 25 μl 100 μl Component 100 rxn kit Random Hexamers (50 ng/Yl) 50 μl 250 μl ?Platinum Taq DNA Polymerase DEPC-Treated Water 1.25 ml 1.25 ml High Fidelity (5 U/μl) 100 units E. coli RNase H (2 U/Yl) 50 μl 2 × 50 μl 10X High Fidelity PCR Buffer 1.0 ml *250 mM Tris acetate (pH 8.4), 375 mM potassium acetate, 40 mM 50 mM MgSO4 1.0 ml magnesium acetate, stabilizer Quality Control The Certificate of Analysis (CofA) provides detailed quality control information for each product. The CofA is available on our website at /cofa, and is searchable by product lot number, which is printed on each box. Summary of Procedure
cDNA Synthesis Mix: Sample
RNA + Primer + dNTPs (12 μl) *If less than 1 ng of Denaturation
65°C, 5 min. 5X Buffer 4 RNA is used, reduce (optional) DTT (0.1 M) 1
↓ the amount of Water 1
Place on Ice ThermoScript RT in RNaseOUT? 1
↓ the reaction to 0.5 μl. ?cDNA Synthesis ThermoScript RT
Add 8 μl cDNA synthesis mix 8 μl
↓ ↓ ↓ andom hexame
oligo(dT)20 GSP
50-60°C, 30-60 min 50-65°C, 30-60 min 25°C, 10 min
50-60°C, 20-50
rTerminate Reaction
85°C, 5 min Remove RNA Template
↓ (optional)
Add 1 μl RNase H r
37°C, 20 min
↓ PCR Amplification
Remove 2 μl aliquot for PCR
Part no. 11146.pps MAN0000941 Rev. date: 11 Jun 2010 For technical support, email tech_. For country-specific contact information, visit .Important Parameters to Consider
RNA ? High quality intact RNA is essential for successful full-length cDNA synthesis and successful long RT-PCR.
? RNA should be devoid of any RNase contamination and aseptic conditions should be maintained.
? Recommended methods of total RNA isolation include the Micro-to-Midi Total RNA Purification System (Catalog no. ) and TRIzol? Reagent (Catalog no. ) (2, 3). Oligo(dT)-selection for poly(A)+ RNA is typically not necessary, although incorporating this step may improve the yield of specific cDNAs. cDNA Synthesis Primers ? Oligo(dT)20 (50 pmoles/reaction) is recommended for priming polyadenylated RNA.
Use of Oligo(dT)20 allows the detection of multiple transcripts from a single first-strand reaction. ? Random hexamers (50-250 ng/reaction) are efficient primers for the detection of multiple short RT-PCR targets.
Use of more than 50-100 ng primer/Yg of RNA can increase the yield of short products but may inhibit detection of long targets (>3kb) or rare transcripts.
If random hexamers are used, the first-strand reaction must be incubated at 25°C for 10 min to extend the primers prior to increasing the reaction temperature for synthesis. ? Gene-specific primers (GSP) should be used at 10 to 20 pmol/reaction.
Specificity of priming may be improved by optimizing annealing/reaction temperature. ? Treatment of cDNA with RNase H to remove the complementary RNA prior to PCR is optional. RNase H digestion will improve the RT-PCR signal of many targets and is required for the efficient and consistent amplification of long RT-PCR templates. cDNA Synthesis Reaction ? Denaturation of the RNA template and primer by incubating at 65°C for 5 min is optional.
Most targets can be reverse transcribed efficiently without this step.
However, heating the RNA in the absence of reaction buffer and enzyme prior to cDNA synthesis can remove secondary structure that may impede full-length cDNA synthesis. ? ThermoScript? RT can be used at 50-65°C.
We recommend incubation at 50-55°C for most RT-PCR targets. However, incubation at 50-60°C for oligo(dT) and 50-65°C for gene-specific primers can be employed to reduce secondary structure or to improve specificity. ? Most targets can be amplified after only a 30-min incubation for the first-strand reaction. Rare RNAs, long transcripts, or targets at the 5′ end of long transcripts benefit from longer incubation times (50-60 min). Page 2 of 4
PCR Primers ? A final primer concentration of 0.2 - 0.4 μM for each primer
however, a primer titration is recommended for best results. ? Design primers that anneal to sequence in exons on both sides of an intron or exon/exon boundary of the mRNA to allow differentiation between amplification of cDNA and potential contaminating genomic DNA. ? Primers should not be self-complementary or complementary to each other at the 3′ ends. PCR Reactions ? Most targets will be efficiently amplified using 2 Yl or less of the cDNA synthesis reaction. ? The optimum magnesium concentration varies from 1.5 to 3 mM.
Generally, 1.82 mM magnesium chloride for Platinum? Taq DNA polymerase and 2.32 mM magnesium sulfate for Platinum? Taq DNA Polymerase High Fidelity is effective for most primer sets. However, titration of the magnesium concentration is recommended for the best result. Each Yl of the cDNA synthesis reaction adds 0.16 mM to the final magnesium concentration in a 50-μl PCR reaction. ? Assemble the PCR reactions on ice, transfer them to a pre-heated thermal cycler (85-95°C) and immediately start the PCR amplification program. ? The annealing temperature should be 10°C below the melting temperature of the primers used. ? The optimum extension temperature for Platinum? Taq DNA Polymerase High Fidelity is 68°C. The extension time varies with the size of the amplicon (approximately 1 min per 1 kb of amplicon).
cDNA Synthesis 1. In a 0.2- or 0.5-ml tube, combine primer (50 μM Oligo(dT)20, 50 ng/μl random primer or 10 μM gene-specific primer), RNA, and dNTP mix and adjust volume to 12 Yl with DEPC-treated water.
Component Amount
Primer 1 Yl
RNA (10 pg -5 Yg)
10 mM dNTP Mix
DEPC-treated water to 12 Yl 2. Denature RNA and primer by incubating at 65°C for 5 min and then place on ice (optional). 3. Vortex the 5X cDNA Synthesis Buffer for 5 s just prior to use. 4. Prepare a master reaction mix on ice and vortex gently.
Component 1 Reaction 10 Reactions
5x cDNA Synthesis Buffer 4 Yl 40 Yl
0.1 M DTT 1 Yl 10 Yl
RNaseOUT? (40 U/Yl) 1 Yl
DEPC-treated water
1 Yl 10 Yl
ThermoScript? RT (15 units/Yl)1 Yl* 10 Yl* *NOTE:
If less than 1 ng of template RNA is used, reduce the amount of ThermoScript? RT in the reaction to 0.5 μl/reaction (5 μl/10 reactions). Increase the amount of DEPC-treated water in the master reaction mix to 1.5 μl/reaction (15 μl/10 reactions). 5. Pipet 8 Yl of master reaction mix into each reaction tube on ice. 6. Transfer the sample to a thermal cycler preheated to the appropriate cDNA synthesis temperature and incubate as follows. Oligo(dT)20 primed: 30-60 min at 50°C (or 50-60°C) Gene-specific primed
30-60 min at 50°C (or 50-65°C) Random-hexamer primed: 25°C for 10 min, followed by 20-50 min at 50°C (or 50-65°C) 7. Terminate the reaction by incubating at 85°C for 5 min. 8. Add 1 Yl of RNase H and incubate at 37°C for 20 min (optional). 9. cDNA synthesis reactions can be stored at -20°C or used for PCR immediately. PCR with Platinum? Taq DNA Polymerase High Fidelity Use only 10% of the cDNA synthesis reaction (2 Yl) for PCR. Use of 2 μl of 50 mM MgSO4 and 2 Yl of cDNA (0.32 mM magnesium in a 50-Yl PCR) results in a final concentration of 2.32 mM magnesium, which is effective for most primer sets. However, titration of the magnesium concentration with the provided 50 mM MgSO4 is recommended for best results. 1. Add the following to a 0.2- or 0.5-ml, thin-walled, PCR tube:
Component 1 Reaction 10 Reactions
10X High Fidelity PCR Buffer 5 Yl 50 Yl
50 mM MgSO4 2 μl 20 μl
10 mM dNTP Mix
1 Yl 10 Yl
10 YM sense primer 1 Yl 10 Yl
10 YM antisense primer 1 Yl 10 Yl
Platinum? Taq High Fidelity 0.2 Yl 2 Yl
cDNA (from cDNA synthesis reaction) 2 Yl 20 Yl
DEPC-treated water 37.8 Yl 378 Yl
Final volume 50 Yl 500 μl Page 3 of 4 2.
Mix gently and overlay with silicone oil or mineral oil if the thermal cycler lacks a heated lid. 3.
Incubate at 94°C for 2 min, then perform 20 to 40 cycles of PCR with optimized conditions for your sample (1 min/kb extension time at 68°C). 4. Analyze 10 Yl of the amplified sample by agarose gel electrophoresis. PCR with Platinum? Taq DNA Polymerase Use only 10% of the cDNA synthesis reaction (2 Yl) for PCR. Use of 50 mM MgCl2 and 2 Yl of cDNA will result in a final magnesium concentration of 1.82 mM, which is adequate for most primers and targets. However, titration of magnesium concentration is recommended for best results. 1. Add the following to a 0.2- or 0.5-ml, thin-walled, PCR tube:
Component 1 Reaction 10 Reactions
10X PCR Buffer Minus Mg 5 Yl 50 Yl
50 mM MgCl2 1.5 Yl 15 Yl
10 mM dNTP Mix
1 Yl 10 Yl
10 YM sense primer 1 Yl 10 Yl
10 YM antisense primer 1 Yl 10 Yl
Platinum? Taq DNA polymerase 0.4 Yl 4 Yl
cDNA (from cDNA synthesis reaction) 2 Yl 20 Yl
DEPC-treated water 38.1 Yl 381 Yl
Final volume 50 Yl 500 μl 2. Mix gently and overlay with silicone oil or mineral oil if the thermal cycler lacks a heated lid. 3. Incubate at 94°C for 2 min, then perform 20 to 40 cycles of PCR with optimized conditions for your sample (1 min/kb extension time at 68-72°C) 4. Analyze 10 Yl of the amplified sample by agarose gel electrophoresis. Control Reactions An RT-PCR Primer and Control Set is available separately for monitoring the performance of the system (Cat. Number ).
1. Use 1 ng of the Control RNA in the cDNA Synthesis Reaction. 2. Perform the PCR using Platinum? Taq DNA Polymerase, as described above.
Page 4 of 4 Troubleshooting Guide Problem No RT-PCR product
Possible cause No cDNA synthesis (temperature too high) Incomplete synthesis of target cDNA (secondary structure of RNA blocks synthesis) RNase contamination Concentration of template RNA in reaction is too low RNA has been damaged or degraded RT inhibitors are present in RNA Possible solution For the cDNA synthesis step, incubate at 45-50°C. For the cDNA synthesis step, incubate at 50-70°C. For long mRNAs, increase cDNA synthesis incubation time (up to 50 min) Maintai add RNaseOUT? (RNase inhibitor). Increase the concentration of template RNA; use 1-5 μg of total RNA or reduce the volume of ThermoScript? RT used in the reaction. Replace RNA. Remove inhibitors in the RNA preparation by an additional 70% ethanol wash after ethanol precipation. Note: Inhibitors of RT include SDS, EDTA, guanidinium chloride, formamide, sodium phosphate and spermidine (4).
Low yield/low specificity in PCR
Unexpected bands after electrophoresis Cycle number is too low Reaction conditions not optimal
RNA contamination with genomic DNA Increase cycle number. Optimize magnesium concentration. Optimize the primer concentration Optimize the annealing temperature and extension time. Increase temperature of RT reaction to 50-60°C. Pre-treat RNA with DNase I.
Redesign PCR primers to anneal to sequence in exons on both sides of an intron in the target gene.
References 1. 2. 3. 4. Westfall, B., Sitaraman, K., Solus, J., Hughes, J., and Rashtchian, A. (1997) Focus? 19, 46. Chomczynski, P and Sacchi, N. (1987) Anal. Biochem. 162, 156. Chirgwin, J.M., Przybyla, A.E., MacDonald, R.J., and Rutter, W.J. (1979) Biochemistry 18, 5294. Gerard, G.F (1994). Focus? 16, 102. Limited Use Label License No. 1: Thermostable Polymerases (applies to , , and ) Use of this product is covered by one or more of the following US patents and corresponding patent claims outside the US: 5,789,224, 5,618,711, and 6,127,155. The purchase of this product includes a limited, non-transferable immunity from suit under the foregoing patent claims for using only this amount of product for the purchaser’s own internal research. No right under any other patent claim, no right to perform any patented method, and no right to perform commercial services of any kind, including without limitation reporting the results of purchaser's activities for a fee or other commercial consideration, is conveyed expressly, by implication, or by estoppel. This product is for research use only. Diagnostic uses under Roche patents require a separate license from Roche. Further information on purchasing licenses may be obtained by contacting the Director of Licensing, Applied Biosystems, 850 Lincoln Centre Drive, Foster City, California 94404, USA. Limited Use Label License No. 4: Products for PCR that include no rights to perform PCR (applies to
and ) This product is compatible for use in the Polymerase Chain Reaction (PCR) process claimed in patents owned by Roche Molecular Systems, Inc. and F. Hoffmann-La Roche Ltd. No license under these patents is conveyed expressly, by implication, by estoppel or otherwise to the purchaser by the purchase of this product. A license to use these patented processes for certain research and development activities accompanies the purchase of certain reagents of Applied Biosystems and other licensed suppliers when used in conjunction with an authorized thermal cycler, or is available from Applied Biosystems. Further information on purchasing licenses may be obtained by contacting the Director of Licensing, Applied Biosystems, 850 Lincoln Centre Drive, Foster City, California 94404, USA. Limited Use Label License No: 5: Invitrogen Technology (applies to all) The purchase of this product conveys to the buyer the non-transferable right to use the purchased amount of the product and components of the product in research conducted by the buyer (whether the buyer is an academic or for-profit entity). The buyer cannot sell or otherwise transfer (a) this product (b) its components or (c) materials made using this product or its components to a third party or otherwise use this product or its components or materials made using this product or its components for Commercial Purposes. The buyer may transfer information or materials made through the use of this product to a scientific collaborator, provided that such transfer is not for any Commercial Purpose, and that such collaborator agrees in writing (a) not to transfer such materials to any third party, and (b) to use such transferred materials and/or information solely for research and not for Commercial Purposes. Commercial Purposes means any activity by a party for consideration and may include, but is not limited to: (1) use of the product or its compone (2) use of the product or its components to provide a service, information, (3) use of the product or its components for therapeutic, diagnostic or p or (4) resale of the product or its components, whether or not such product or its components are resold for use in research. For products that are subject to multiple limited use label licenses, the terms of the most restrictive limited use label license shall control. Life Technologies Corporation will not assert a claim against the buyer of infringement of patents owned or controlled by Life Technologies Corporation which cover this product based upon the manufacture, use or sale of a therapeutic, clinical diagnostic, vaccine or prophylactic product developed in research by the buyer in which this product or its components was employed, provided that neither this product nor any of its components was used in the manufacture of such product. If the purchaser is not willing to accept the limitations of this limited use statement, Life Technologies is willing to accept return of the product with a full refund. For information about purchasing a license to use this product or the technology embedded in it for any use other than for research use please contact Out Licensing, Life Technologies, 5791 Van Allen Way, Carlsbad, California 92008; Phone (760) 603-7200 or e-mail: . Limited Use Label License No: 14: Direct Inhibition by Anti-Polymerase Antibodies (applies to , , and ) Licensed to Life Technologies Corporation, under U.S. Patent Nos. 5,338,671; 5,587,287; and foreign equivalents for use in research only
Limited Use Label License No. 17: AFLP? Products (applies to ) The AFLP? technique is covered by patents or patented applications owned by Keygene n.v and this product is sold under license from Keygene n.v. This kit may be used for research purposes only. For use of this kit in plant breeding, contact the Licensing Department, Life Technologies Corporation, 5791 Van Allen Way, Carlsbad, California 92008. Phone (760) 603-7200. Fax (760) 602-6500. The use of this kit for any other purpose, including but not limited to the use for clinical, diagnostic, and/or
or for providing services to third parties, requires a license from Keygene n.v., P.O. Box 216, 6700 AE Wageningen, The Netherlands.
?2010 Life Technologies Corporation. All rights reserved. For research use only. Not intended for any animal or human therapeutic or diagnostic use. The trademarks mentioned herein are the property of Life Technologies Corporation or their respective owners. 三亿文库包含各类专业文献、专业论文、中学教育、行业资料、生活休闲娱乐、应用写作文书、高等教育、51invitrog逆转录试剂盒说明书等内容。　
　Synthesis Kit 中文说明书_生物学_自然科学_专业资料...使用 5μg 的总 RNA 模板,可采用 60μM 的随机...逆转录试剂盒( transcri... 32页 7下载券 Thermo... 　体外转录试剂盒说明书_生物学_自然科学_专业资料。...除了加入不同比率的 m7G(5')ppp(5')G,T7-...in section “ Spin column preparation and use” ... 　逆转录试剂盒( transcriptor first strand cdna synthesis kit )操作步骤_生物学_自然科学_专业资料。Transcriptor First Strand cDNA Synthesis Kit 逆转录步骤 1, ... 　invitrog逆转录试剂盒说... 4页 免费 转移人端粒酶逆转录酶基... 4页 免费...M-MLV逆转录酶说明书 【... 2页 免费 RNA逆转录RT PCR说明书 暂无评价 11... 　invitrog逆转录试剂盒说明... 4页 免费 生理学 11页 免费如要投诉违规内容,请到百度文库投诉中心;如要提出功能问题或意见建议,请点击此处进行反馈。 ... 　4 内容: 4.1 实验准备:①逆转录试剂盒(Promega,检查试剂盒保质期,Control RNA 保存 在 -70 ℃,其他组份保存在 -20 ℃ ) ;② 0.2ml RNase-free EP 管;... 　丙型肝炎病毒核酸定量测定试剂盒说明书_生物学_自然科学_专业资料。丙型肝炎病毒...(HCV)的特异性引物,一条特异性荧光探针, 采用逆转录酶、耐热 DNA 聚合酶(Taq... 　● 使用 1 μg 分离纯化的 mRNA 作为模板合成的第一链 cDNA, 可用于第二链...使用说明书 First Stran... 2页 1下载券
逆转录试剂盒( transcri... 32...