是时候，换个姿势关注TA
关注 功能升级，收割　TA 的最新动态
扫我下载最新九游APP
查看: 359|回复: 1
最后登录积分71精华0帖子
Lv1新手上路, 经验 71, 距离下一级还需 129 经验
60级精灵融合& &我有2个40的 同类型精灵& &书也有的&&
为什么下面&&40级精灵地方显示是暗的&&
最后登录积分24182精华0帖子
星级不同吧
您对该GM的评价：（登录并绑定手机即可获得投票机会。立刻/）
安卓平台下载
苹果平台下载| 　
| 　
| 　
| 　
| 　
只需一步，快速开始
查看: 2190|回复: 4
我就想知道怎么升级小精灵，快到最后了，还是2级的小精灵，谢谢各位了。。。。。。。。。。。。。。。。。。。。。。。。。。。。
主题帖子积分
超级玩家, 积分 993, 距离下一级还需 7 积分
超级玩家, 积分 993, 距离下一级还需 7 积分
如题，在哪升级，需要啥材料啊还是特定的关卡，希望能详细点
主题帖子积分
游戏狂人, 积分 1957, 距离下一级还需 43 积分
游戏狂人, 积分 1957, 距离下一级还需 43 积分
记得小精灵3要研究(解剖)破坏者
主题帖子积分
高级玩家, 积分 567, 距离下一级还需 33 积分
高级玩家, 积分 567, 距离下一级还需 33 积分
楼上正解，打破坏者建议上榴弹兵点出破甲+连射。我一个榴弹兵升级自己领悟了速射，输出爆炸，每回合射2次，武器上+3弹夹、自动装填、+15命中。子弹上蓝屏子弹一回合打机械类是20+的伤害。
主题帖子积分
超级玩家, 积分 829, 距离下一级还需 171 积分
超级玩家, 积分 829, 距离下一级还需 171 积分
破坏者是大后期才会出现的敌人，一种大个机器人，收了它的尸体就能研究出小精灵MK3了
主题帖子积分
游戏达人, 积分 2341, 距离下一级还需 1159 积分
游戏达人, 积分 2341, 距离下一级还需 1159 积分
破坏者跟时间有关的，时间到了就出了。然后解刨破坏者的任务需要走主线的。主线不到不会出解刨破坏者的研究。
Powered by后使用快捷导航没有帐号？
正在上传图片(0/1)
请教：为啥我的精灵3升不了级？？？
有一段时间没飞了，之前我的精灵3升级到了v1.3.20，现在看见已经有了 v1.6.0040，直接下载升级，却老是失败。我又返回去下载v1.5.0030进行升级，结果还是失败。我又返回去下载v1.3.20进行升级，结果也失败。请教& && &&&各位大神，怎样才能解决这个问题？
请教：为啥我的精灵3升不了级？？？
一级一级的升。多试几次。
请教：为啥我的精灵3升不了级？？？
慢慢来，别着急！
请教：为啥我的精灵3升不了级？？？
我的也升级失败，返厂了
请教：为啥我的精灵3升不了级？？？
我的也是升级失败，返场了
请教：为啥我的精灵3升不了级？？？
麻烦楼主将1.6.40的升级Bin文件放入SD卡内，开机进行升级，然后将升级生成的log文件上传我帮您看看
微信关注，获取最全面的大疆产品教学视频，及时的售后服务动态，最实用的飞行指引和专业的技术支持，！
请教：为啥我的精灵3升不了级？？？
麻烦楼主将1.6.40的升级Bin文件放入SD卡内，开机进行升级，然后将升级生成的log文件上传我帮您看看 ...好滴，回家后上传给你看
请教：为啥我的精灵3升不了级？？？
飞得好好的，为毛要升级呢？
问题多多。
请教：为啥我的精灵3升不了级？？？
飞得好好的，为毛要升级呢？
问题多多。就是哈
请教：为啥我的精灵3升不了级？？？
麻烦楼主将1.6.40的升级Bin文件放入SD卡内，开机进行升级，然后将升级生成的log文件上传我帮您看看 ...Result: Success.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
18:00:04 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
09:57:41 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
==========
10:42:13 =====================
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
12:13:17 =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
==========
00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.
==========
15:14:43 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
15:47:11 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
17:25:47 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
21:03:06 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
16:23:02 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
16:30:07 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.05.0030.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
22:01:04 =====================
Packet: P3X_FW_V01.05.0030.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:16 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
麻烦看一下这是怎么一回事？
请教：为啥我的精灵3升不了级？？？
麻烦楼主将1.6.40的升级Bin文件放入SD卡内，开机进行升级，然后将升级生成的log文件上传我帮您看看 ...今天又升级了一次，还是失败求解:'(
请教：为啥我的精灵3升不了级？？？
一级一级的升。多试几次。还是不行:'(:'(:'(:'(
请教：为啥我的精灵3升不了级？？？
我的也升级失败，返厂了如何返厂？求教！
请教：为啥我的精灵3升不了级？？？
DJI应该改进升级问题，简化操作流程，
比如一键更新，一键恢复，
避免来回折腾，你们也省心呀。
请教：为啥我的精灵3升不了级？？？
今天又升级了一次，还是失败求解那misc/log里的文件上传看看
微信关注，获取最全面的大疆产品教学视频，及时的售后服务动态，最实用的飞行指引和专业的技术支持，！
请教：为啥我的精灵3升不了级？？？
那misc/log里的文件上传看看Result: Success.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
18:00:04 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
09:57:41 =====================
Packet: P3X_FW_V01.02.0006.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
==========
10:42:13 =====================
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
12:13:17 =====================
Packet: P3X_FW_V01.03.0020.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:13 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Success.
==========
00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Upgrading ...
Result: Success.
==========
15:14:43 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
15:47:11 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
17:25:47 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
21:03:06 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:12 remo-con disconnect======
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
16:23:02 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
16:30:07 =====================
Packet: P3X_FW_V01.04.0010.bin
Result: Abort.
The firmware on the SD card is identical to or older than the current firmware on the aircraft.
==========
00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:14 remo-con disconnect======
Packet: P3X_FW_V01.05.0030.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
22:01:04 =====================
Packet: P3X_FW_V01.05.0030.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:16 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.03.0020.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Upgrading ...
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
==========
00:00:15 remo-con disconnect======
Packet: P3X_FW_V01.06.0040.bin
Result: Failed.
Reboot the aircraft and try to upgrade the firmware again.
请教：为啥我的精灵3升不了级？？？
Result: Success.
==========
00:00:13 remo-con disconnect======这个是TXT，发一个misc/log里的亲
微信关注，获取最全面的大疆产品教学视频，及时的售后服务动态，最实用的飞行指引和专业的技术支持，！
请教：为啥我的精灵3升不了级？？？
这个是TXT，发一个misc/log里的亲除了bin的升级包，SD里就只有TXT这个文件了
请教：为啥我的精灵3升不了级？？？
这个是TXT，发一个misc/log里的亲找到了
[ 00] Firmware upgrade finished successfully.
[]Packet [C:\P3X_FW_V01.02.0006.bin] resumed, card sn [0x0105eb07].
[]Version checking[2]...
[ 05][00] v34.2.0.8 -& v34.2.0.9 need upgrade.
[ 06][00] v2.1.6.18 -& v2.2.6.8 need upgrade.
[ 00][00] v1.36.0.0 -& v1.38.0.0 need upgrade.
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.6.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.2 -& v1.1.1.6 need upgrade.
[ 01][00] v1.0.2.4 -& v1.0.2.5 need upgrade.
[ 00][00] v1.0.8.59 -& v1.0.8.96 need upgrade.
[ 00][05] v1.15.3056 -& v1.15.3056
[ 01][00] v1.5.2735 -& v1.15.3056 need upgrade
[ 00][00] v0.11.0.4 -& v0.11.0.4
[]Firmware upgrading[2]...
[ 01] Firmware upgrade start...
[ 01] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 01] Firmware upgrade start...
[ 01] Firmware upgrade finished successfully.
[ 05] Firmware upgrade start...
[ 05] Firmware upgrade finished successfully.
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[3]...
[ 05][05] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.2.6.8 -& v2.2.6.8
[ 00][05] v1.38.0.0 -& v1.38.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.6.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][05] v1.1.1.6 -& v1.1.1.6
[ 01][05] v1.0.2.5 -& v1.0.2.5
[ 00][05] v1.0.8.96 -& v1.0.8.96
[ 00][05] v1.15.3056 -& v1.15.3056
[ 01][05] v1.15.3056 -& v1.15.3056
[ 00][00] v0.11.0.4 -& v0.11.0.4
[]Packet upgrade finish successfully.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.8 -& v2.2.6.8
[ 00][00] v1.38.0.0 -& v1.38.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.6.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.6 -& v1.1.1.6
[ 01][00] v1.0.2.5 -& v1.0.2.5
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.15.3056 -& v1.15.3056
[ 01][00] v1.15.3056 -& v1.15.3056
[ 00][00] v0.11.0.4 -& v0.11.0.4
[]Packet upgrade cancelled at version checking.
[]==========
18:00:04. boot(15) ============
[]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.8 -& v2.2.6.8
[ 00][00] v1.38.0.0 -& v1.38.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.6.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.6 -& v1.1.1.6
[ 01][00] v1.0.2.5 -& v1.0.2.5
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.15.3056 -& v1.15.3056
[ 01][00] v1.15.3056 -& v1.15.3056
[ 00][00] v0.11.0.4 -& v0.11.0.4
[]Packet upgrade cancelled at version checking.
[]==========
09:57:41. boot(15) ============
[]Packet [C:\P3X_FW_V01.02.0006.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.8 -& v2.2.6.8
[ 00][00] v1.38.0.0 -& v1.38.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.6.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.6 -& v1.1.1.6
[ 01][00] v1.0.2.5 -& v1.0.2.5
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.15.3056 -& v1.15.3056
[ 01][00] v1.15.3056 -& v1.15.3056
[ 00][00] v0.11.0.4 -& v0.11.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.8 -& v2.2.6.19 need upgrade.
[ 00][00] v1.38.0.0 -& v1.40.0.0 need upgrade.
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.7.0.0 need upgrade.
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.6 -& v1.1.1.7 need upgrade.
[ 01][00] v1.0.2.5 -& v1.0.2.7 need upgrade.
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.15.3056 -& v1.23.3419 need upgrade
[ 01][00] v1.15.3056 -& v1.23.3419 need upgrade
[ 00][00] v0.11.0.4 -& v0.12.0.4 need upgrade.
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Packet [C:\P3X_FW_V01.03.0020.bin] resumed, card sn [0x0105eb07].
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.8 -& v2.2.6.19 need upgrade.
[ 00][00] v1.38.0.0 -& v1.40.0.0 need upgrade.
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.7.0.0 need upgrade.
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.6 -& v1.1.1.7 need upgrade.
[ 01][00] v1.0.2.5 -& v1.0.2.7 need upgrade.
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][05] v1.23.3419 -& v1.23.3419
[ 01][00] v1.15.3056 -& v1.23.3419 need upgrade
[ 00][00] v0.11.0.4 -& v0.12.0.4 need upgrade.
[]Firmware upgrading[2]...
[ 01] Firmware upgrade start...
[ 01] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 01] Firmware upgrade start...
[ 01] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[3]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.2.6.19 -& v2.2.6.19
[ 00][05] v1.40.0.0 -& v1.40.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][05] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][05] v1.1.1.7 -& v1.1.1.7
[ 01][05] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][05] v1.23.3419 -& v1.23.3419
[ 01][05] v1.23.3419 -& v1.23.3419
[ 00][05] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade finish successfully.
[]==========
10:42:14. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Record vlink 01.03.0020 &-& 01.01.0009 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.2.6.19
[ 00][00] v1.40.0.0 -& v1.40.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.6.0.0 -& v1.7.0.0 need upgrade.
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.2.6.19
[ 00][00] v1.40.0.0 -& v1.40.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][05] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade finish successfully.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Record vlink 01.03.0020 &-& 01.01.0009 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.2.6.19
[ 00][00] v1.40.0.0 -& v1.40.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]==========
12:13:17. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Record vlink 01.03.0020 &-& 01.01.0009 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.2.6.19
[ 00][00] v1.40.0.0 -& v1.40.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.8.0.0 -& v1.8.0.0
[ 01][00] v1.8.0.0 -& v1.8.0.0
[ 02][00] v1.8.0.0 -& v1.8.0.0
[ 03][00] v1.8.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.03.0020 &-& 01.01.0009 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.3.0.13 need upgrade.
[ 00][00] v1.40.0.0 -& v1.41.0.0 need upgrade.
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.8.0.0 -& v1.10.0.0 need upgrade.
[ 01][00] v1.8.0.0 -& v1.10.0.0 need upgrade.
[ 02][00] v1.8.0.0 -& v1.10.0.0 need upgrade.
[ 03][00] v1.8.0.0 -& v1.10.0.0 need upgrade.
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 01] Firmware upgrade start...
[ 01] Firmware upgrade finished successfully.
[ 02] Firmware upgrade start...
[ 02] Firmware upgrade finished successfully.
[ 03] Firmware upgrade start...
[ 03] Firmware upgrade finished successfully.
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.3.0.13 -& v2.3.0.13
[ 00][05] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][05] v1.10.0.0 -& v1.10.0.0
[ 01][05] v1.10.0.0 -& v1.10.0.0
[ 02][05] v1.10.0.0 -& v1.10.0.0
[ 03][05] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.03.0020 &-& 01.01.0009 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 1).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.2.6.19 need upgrade.
[ 00][00] v1.41.0.0 -& v1.40.0.0 need upgrade.
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.8.0.0
[ 01][00] v1.10.0.0 -& v1.8.0.0
[ 02][00] v1.10.0.0 -& v1.8.0.0
[ 03][00] v1.10.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.2.6.19 -& v2.2.6.19
[ 00][05] v1.40.0.0 -& v1.40.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.8.0.0
[ 01][00] v1.10.0.0 -& v1.8.0.0
[ 02][00] v1.10.0.0 -& v1.8.0.0
[ 03][00] v1.10.0.0 -& v1.8.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade finish successfully.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.3.0.13 need upgrade.
[ 00][00] v1.40.0.0 -& v1.41.0.0 need upgrade.
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.3.0.13 -& v2.3.0.13
[ 00][05] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade finish successfully.
[]==========
15:14:43. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]==========
15:47:12. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]==========
17:25:48. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]==========
21:03:07. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]==========
16:23:03. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]==========
16:30:08. boot(15) ============
[]Packet [C:\P3X_FW_V01.04.0010.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.04.0010 &-& 01.03.0020.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.3.0.13
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.3 -& v1.7.0.3
[ 00][00] v1.7.0.0 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] v1.1.2.0 -& v1.1.2.0
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.23.3419
[ 01][00] v1.23.3419 -& v1.23.3419
[ 00][00] v0.12.0.4 -& v0.12.0.4
[]Packet upgrade cancelled at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.4.10.7 need upgrade.
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.0 -& v1.7.15.1 need upgrade.
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.23.3419 -& v1.26.4315 need upgrade
[ 01][00] v1.23.3419 -& v1.26.4315 need upgrade
[ 00][00] device not detected.
[ 00][00] v1.7.0.3 -& v2.13.0.0 need upgrade.
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Packet [C:\P3X_FW_V01.06.0040.bin] resumed, card sn [0x0105eb07].
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.3.0.13 -& v2.4.10.7 need upgrade.
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.0.0 -& v1.7.15.1 need upgrade.
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][05] v1.26.4315 -& v1.26.4315
[ 01][00] v1.23.3419 -& v1.26.4315 need upgrade
[ 00][00] device not detected.
[ 00][00] v1.7.0.3 -& v2.13.0.0 need upgrade.
[]Firmware upgrading[2]...
[ 01] Firmware upgrade start...
[ 01] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[3]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.4.10.7 -& v2.4.10.7
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][05] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][05] v1.26.4315 -& v1.26.4315
[ 01][05] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][05] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.10.7
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.10.7
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.05.0030.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.05.0030 &-& 01.04.0010.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.0.5
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]==========
22:01:05. boot(15) ============
[]Packet [C:\P3X_FW_V01.05.0030.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.05.0030 &-& 01.04.0010.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.0.5
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.10.7
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.10.7
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 1).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.2.6.19 need upgrade.
[ 00][00] v1.41.0.0 -& v1.40.0.0 need upgrade.
[ 00][00] v2.13.0.0 -& v1.7.0.3
[ 00][00] v1.7.15.1 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.8.0.0
[ 01][00] v1.10.0.0 -& v1.8.0.0
[ 02][00] v1.10.0.0 -& v1.8.0.0
[ 03][00] v1.10.0.0 -& v1.8.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.23.3419
[ 01][00] v1.26.4315 -& v1.23.3419
[ 00][00] device not detected.
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.2.6.19 -& v2.2.6.19
[ 00][05] v1.40.0.0 -& v1.40.0.0
[ 00][00] v2.13.0.0 -& v1.7.0.3
[ 00][00] v1.7.15.1 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.8.0.0
[ 01][00] v1.10.0.0 -& v1.8.0.0
[ 02][00] v1.10.0.0 -& v1.8.0.0
[ 03][00] v1.10.0.0 -& v1.8.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.23.3419
[ 01][00] v1.26.4315 -& v1.23.3419
[ 00][00] device not detected.
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.03.0020.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.03.0020 &-& 01.01.0009.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 1).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.2.6.19
[ 00][00] v1.40.0.0 -& v1.40.0.0
[ 00][00] v2.13.0.0 -& v1.7.0.3
[ 00][00] v1.7.15.1 -& v1.7.0.0
[ 00][00] v1.10.0.0 -& v1.8.0.0
[ 01][00] v1.10.0.0 -& v1.8.0.0
[ 02][00] v1.10.0.0 -& v1.8.0.0
[ 03][00] v1.10.0.0 -& v1.8.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.23.3419
[ 01][00] v1.26.4315 -& v1.23.3419
[ 00][00] device not detected.
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.2.6.19 -& v2.4.10.7 need upgrade.
[ 00][00] v1.40.0.0 -& v1.41.0.0 need upgrade.
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Waiting for user confirm...
[]Timeout, start upgrade automatically.
[]Firmware upgrading[1]...
[ 06] Firmware upgrade start...
[ 06] Firmware upgrade finished successfully.
[ 00] Firmware upgrade start...
[ 00] Firmware upgrade finished successfully.
[]Version checking[2]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][05] v2.4.10.7 -& v2.4.10.7
[ 00][05] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
[]========== remo-con disconnect. boot(15) ============
[]Packet [C:\P3X_FW_V01.06.0040.bin] detected, card sn [0x0105eb07].
[]Packet upgrade start...
[]Packet checking...
[]Packet vlink 01.06.0040 &-& 01.05.0030.
[]Record vlink 01.04.0010 &-& 01.03.0020 (flow = 0).
[]Version checking[1]...
[ 05][00] v34.2.0.9 -& v34.2.0.9
[ 06][00] v2.4.10.7 -& v2.4.10.7
[ 00][00] v1.41.0.0 -& v1.41.0.0
[ 00][00] v1.7.15.1 -& v1.7.15.1
[ 00][00] v1.10.0.0 -& v1.10.0.0
[ 01][00] v1.10.0.0 -& v1.10.0.0
[ 02][00] v1.10.0.0 -& v1.10.0.0
[ 03][00] v1.10.0.0 -& v1.10.0.0
[ 00][00] device not detected.
[ 00][00] v1.1.1.7 -& v1.1.1.7
[ 01][00] v1.0.2.7 -& v1.0.2.7
[ 00][00] v1.0.8.96 -& v1.0.8.96
[ 00][00] v1.26.4315 -& v1.26.4315
[ 01][00] v1.26.4315 -& v1.26.4315
[ 00][00] device not detected.
[ 00][00] v2.13.0.0 -& v2.13.0.0
[]Packet upgrade failed at version checking.
请教：为啥我的精灵3升不了级？？？
[ 00] Firmware upgrade finished successfully.
[]Done.这个目前只能寄回来我们这边帮您解决了，建议您通过: 点击加号与我们在线技术支持取得联系，我的相关同事会协助您解决此问题
微信关注，获取最全面的大疆产品教学视频，及时的售后服务动态，最实用的飞行指引和专业的技术支持，！
微信关注 "大疆服务"
获取全面的产品教学视频
飞行指引和技术支持