取代：有限公司发布修复程序xae500w2k8070 -思杰XenApp 5 Windows Server 2008的x86 | 帮助/支持 - 专注于Citrix 做连接 用户 公司 与 工程师的平台
CTX127597 (
/ / / / / / / / / / / / / / / ) CTX127597 XenApp 5.0 for Windows Server 2008 x86,XenApp Fundamentals 3.0 XenApp 5.0 for Windows Server 2008 x86,XenApp Fundamentals 3.0 Software Update Software Update
修补程序包名称：xae500w2k8070.msp：运行Windows的计算机
Hotfix package name: XAE500W2K8070.MSP
For: Computers running Windows Server 2008 (32-bit) with one of the following installed:
XenApp 5.0 for Windows Server 2008
XenApp Fundamentals 3.0
Access Essentials 3.0
Replaces: XAE500W2K8001, XAE500W2K8003, XAE500W2K8004, XAE500W2K8005, XAE500W2K8009, XAE500W2K8011, XAE500W2K8012, XAE500W2K8024, XAE500W2K8025, XAE500W2K8032, XAE500W2K8034, XAE500W2K8041, XAE500W2K8042, XAE500W2K8046
Date: January, 2011
Language supported: English (US)
Readme version: 1.00
Readme Revision History
Change Description
January, 2011
Initial release
Important Note(s) about This Release
Caution! This hotfix may require you to edit the registry. Using Registry Editor incorrectly can cause serious problems that may require you to reinstall your operating system. Citrix cannot guarantee that problems resulting from the incorrect use of Registry Editor can be solved. Use Registry Editor at your own risk.
Important Disclaimer - Limited Release Hotfix
This limited release hotfix is available only upon request. Contact Citrix technical support to obtain the hotfix package. The fix(es) or enhancement(s) contained in this hotfix will be included in a future service pack, hotfix rollup pack, or version release for this product. Testing of this hotfix was targeted only at the affected functionality, and regression and stress testing were minimal. Therefore, this hotfix might cause undesirable and unknown side effects. Introduce this hotfix to a test environment for evaluation before deploying it to a production environment. Your use of this hotfix is at your own risk. TO THE EXTENT PERMITTED BY APPLICABLE LAW, CITRIX AND ITS SUPPLIERS MAKE AND YOU RECEIVE NO WARRANTIES OR CONDITIONS, EXPRESS, IMPLIED, STATUTORY, OR OTHERWISE, AND CITRIX AND ITS SUPPLIERS SPECIFICALLY DISCLAIM WITH RESPECT TO THE HOTFIX ANY CONDITIONS OF QUALITY, ***AILABILITY, RELIABILITY, SECURITY, LACK OF VIRUSES, BUGS OR ERRORS, OR SUPPORT AND ANY IMPLIED WARRANTIES, INCLUDING, WITHOUT LIMITATION, ANY WARRANTY OF TITLE, QUIET ENJOYMENT, QUIET POSSESSION, MERCHANTABILITY, NONINFRINGEMENT, OR FITNESS FOR A PARTICULAR PURPOSE. TO THE EXTENT PERMITTED BY APPLICABLE LAW, NEITHER CITRIX, NOR ITS SUPPLIERS SHALL BE LIABLE FOR ANY DIRECT, INDIRECT, SPECIAL, CONSEQUENTIAL, INCIDENTAL, MULTIPLE, PUNITIVE OR OTHER DAMAGES (INCLUDING, WITHOUT LIMITATION, DAMAGES FOR LOSS OF DATA, LOSS OF INCOME, LOSS OF OPPORTUNITY, LOST PROFITS, COSTS OF RECOVERY OR ANY OTHER DAMAGES), HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, AND WHETHER OR NOT FOR BREACH OF CO***ACT, NEGLIGENCE OR OTHERWISE, AND WHETHER OR NOT CITRIX, ITS SUPPLIERS, OR LICENSORS H***E BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Where to Find Documentation
This document describes the issue(s) resolved by this release and includes installation instructions. For additional product information, see , the Citrix Product Documentation Library.
New Fixes in This Release
After refreshing, custom administrators might not see the entire number of sessions in the Access Management Console.
[From XAE500W2K8070][#201270]
Custom administrators can see and manage published applications without permissions to do so.
[From XAE500W2K8070][#206929]
After installing Hotfix Rollup Pack 3, the system beep no longer works.
[From XAE500W2K8070][#208760]
Users might not be able to connect when there are communication problems between the server and the license server. After applying this fix, the connection to the license server is reinitialized when communication errors occur and the following message is written to the System Event log:
Source: MetaFrame
Event ID: 9034
Description: A Citrix licensing request has timed out. This might be an indication of communication problems between this server and the license server. As a result, the server has reinitialized its connection with the license server. All licenses checked out by this server have been checked back in and attempts will be made to check the licenses out again.
Reinitiating the connection to the license server works around temporary communication problems. However, if the event is logged repeatedly, Citrix recommends that you investigate your network health.
[From XAE500W2K8070][#209944]
Changes to client printer mapping policies are applied to new sessions, but do not take effect for reconnected sessions. With this fix, printing policies are refreshed upon reconnect and session printers rebuilt accordingly.
[From XAE500W2K8070][#220641]
On systems with Fix #197616 installed, Terminal Services refuses to accept connections.
[From XAE500W2K8070][#220936]
This fix addresses a reliability issue with the Citrix Print Manager Service, CpSvc.exe.
[From XAE500W2K8070][#223002]
When connected to a published desktop or to an instance of Windows Media Player published on XenApp 5 running on Windows Server 2008, Macintosh clients lack audio capabilities. The issue occurs because the server fails to enable the proper audio device for those clients.
[From XAE500W2K8070][#223323]
When using a UPD driver for autocreated printers, the system occasionally experiences a fatal exception with stop code 0x0000003B.
[From XAE500W2K8070][#223697]
Local printer properties might not be properly applied to session printers.
[From XAE500W2K8070][#223899]
On occasion, session logoffs fail and the following notification appears: &Please wait for System Event Notification Service.& Attempts to reconnect to such sessions fail as well, while new sessions can be launched without issues.
[From XAE500W2K8070][#224169]
An error occurs when custom administrators attempt to enumerate users while RADE sessions are present.
[From XAE500W2K8070][#224357]
Terminal Services might exit unexpectedly at shutdown.
[From XAE500W2K8070][#226749]
The server restart message that appears in user sessions before a scheduled server restarts (&The Citrix XenApp you are using will be restarted in X minutes. Please save all data and log off. Any unsaved data will be lost&) is missing the word &server& after Citrix XenApp.
[From XAE500W2K8070][#229526]
Vdtw30.dll can cause servers to become unresponsive.
[From XAE500W2K8070][#229659]
If the security setting &System cryptography: Use FIPS compliant algorithms for encryption, hashing, and signing& is enabled, RDP connections fail.
[From XAE500W2K8070][#230249]
On systems with Fix #220641 installed, session printers are deleted when legacy printer naming is in use or when an administrator account with permissions to manage printers (HKEY_LOCAL_MACHINESOFTWARECitrixPrintDefaultPrnFlags = 0x4000) reconnects to a disconnected session after changing printing policies.
[From XAE500W2K8070][#230833]
The &Allow only one instance of the application for each user& application limit, set under advanced application properties in the Delivery Services Console, is not honored for applications that are streamed to server. As a result, a single user can launch multiple instances of the application.
[From XAE500W2K8070][#232777]
In scenarios where the XenApp Acceleration feature of Branch Repeater 5.5 is enabled (default) to compress and accelerate ICA traffic over WANs, shadowing a published desktop session across the WAN can cause the client session to disconnect unexpectedly.
[From XAE500W2K8070][#236597]
Session enumeration - from the console or using MFCOM scripts - can be slow for custom administrators.
[From XAE500W2K8070][#239806]
Fixes from Replaced Hotfixes
In order to meet Microsoft Windows Server 2008 certification requirements, this update provides Authenticode signing for the ctxrdpwsx.dll, ImaSrv.exe, and wsxica.dll files.
[From XAE500W2K8001][#197616]
Servers might become unresponsive when enumerating applications.
[From XAE500W2K8003][#203748]
Incorrect fonts might appear in printouts. Font substitution occurs when fonts installed on the client device fail to be included in the spool file. To enable this fix, you must also deploy the corresponding client-side Fix #179220.
[From XAE500W2K8004][#179220]
After applying Fix #179220, the print spooler might stop responding. To enable this fix, you must also deploy the corresponding client-side Fix #192617.
[From XAE500W2K8004][#192617]
After applying Fix #179220, the size of PDF print spooler files grow some font substitutions might also occur. To enable this fix, you must also deploy the corresponding client-side Fix #201114.
[From XAE500W2K8004][#201114]
On systems where Fixes #202900, #195908, or #179220 are installed, the Citrix Print Manager Service (CpSvc.exe) uses excessive amounts of memory when printing to legacy printers.
[From XAE500W2K8004][#207148]
On systems where Fixes #179220, #192617, or #201114 are installed, the Citrix Print Manager Service (CpSvc.exe) uses excessive amounts of memory when printing to legacy printers and might exit unexpectedly.
[From XAE500W2K8004][#207157]
Changes you make to the configuration of the CPU Utilization Management feature do not get included in the Configuration Logging report.
[From XAE500W2K8005][#198142]
Important: Make sure to read the Important Notes section before installing this hotfix.
This enhancement is a part of a product simplification effort that removes a number of licensing related complexities. Specifically, with this enhancement:
All licensed users of XenApp Advanced, Enterprise, or Platinum hosted applications are also entitled to use the Application streaming feature on their end-user devices in desktop/offline mode without requiring separate licenses
The requirement for a &Citrix Streaming Users& Active Directory group is no longer needed
Annoyance popup messages that remind administrators and users of the remaining grace period of Technology Preview, Beta, and Early Releases no longer appear
Important: For this enhancement to take effect, you must also install the following Access Management Console hotfix(es):
For XenApp 5.0 for Microsoft Windows Server 2008: PresentationServer_5.0.1
Note: After installing this fix, servers configured as XML brokers consume two start-up licenses rather than one.
[From XAE500W2K8005][#205609]
This is an enhancement that allows users to view a preview of their printed document using the Citrix Universal Printer. After applying this fix, you must set the following registry key:
On 32-bit Windows:
HKEY_LOCAL_MACHINESOFTWARECitrixprint
Name: DefaultPrnFlags
Type: REG_DWORD
Data: 0x10000
On 64-bit Windows:
HKEY_LOCAL_MACHINESOFTWAREWow6432NodeCitrixPrint
Name: DefaultPrnFlags
Type: REG_DWORD
Data: 0x10000
If a value for this key exists, add 0x10000 to the existing value. For example, a value of 0x20 becomes 0x10020.
[From XAE500W2K8009][#175118]
Depending on the selected paper type, print previews and printouts using the Citrix Universal Printer are improperly scaled and aligned. This results in page margins and font placements that are different from those of the original document. This is the server-side component of a fix that resolves the issue. To resolve the issue in its entirety, you must also install client-side Fix #198079.
[From XAE500W2K8009][#198079]
An encoding issue might prevent print jobs utilizing the XPS printer driver from completing. The following error message appears instead: ¶meter is incorrect.&
[From XAE500W2K8009][#206182]
Pass-through authentication is not available when accessing a published application from within a published desktop on XenApp 5.0 for Windows 2008 servers. Instead, the user must provide valid credentials to launch a session within a desktop session even when pass-through authentication is enabled in the plugin. To resolve this issue, you must install a server-side hotfix for XenApp 5.0 for Windows 2008 that contains Fix #194894.
[From XAE500W2K8011][#194894]
In a high latency environment, applications which write a large amount of data to a client mapped drive using several small write requests might cause performance issues.
After applying this fix, use the console to configure a Citrix Policy that enables Asynchronous Writes, then apply the policy to the users or servers as needed to resolve this issue.
[From XAE500W2K8011][#198090]
The size of EMF spool files can be very large if the document to be printed contains a large number of fonts. This enhancement introduces support for a registry key that allows you to fine-tune in a more granular way what fonts to include in the spool file:
HKEY_LOCAL_MACHINESOFTWARECitrixPrint
Name: IncludeFonts
Type: REG_SZ
Data: All, None, Required, Legacy*
* All = Include all fonts conta None = I Required = Include differential of fonts contained in the document but not avai Legacy = Include client fonts
[From XAE500W2K8012][#206372]
Cross-server shadowing does not work on Windows Server 2008 unless you set the &Remote Control& permission on the ICA listener.
[From XAE500W2K8025][#206699]
The Access Management Console displays a session as active even if it is disconnected after the idle time-out as set through Terminal Services configuration has elapsed.
[From XAE500W2K8025][#206969]
Cross-server shadowing of sessions running on Windows Server 2008 fails.
[From XAE500W2K8025][#208207]
Anonymous user accounts are not returned to the pool of anonymous accounts after a session is disconnected and reset. As a result, the account is eventually used up even though the account limit is not reached. For more information about Troubleshooting Common Anonymous User Account Scenarios, see Knowledge Center article .
[From XAE500W2K8025][#209610]
When attempting to shadow a user on a different server, some user sessions running on that server might not enumerate.
[From XAE500W2K8025][#216167]
When attempting to shadow from a shadow taskbar running inside an RDP session and selecting a user on a different server to be shadowed, the shadow session fails. The following error message appears instead: &Session no longer exists on the server.&
[From XAE500W2K8025][#218083]
The ICA Listener setting &By default, connect only the client's main printer& is not honored on Windows Server 2008.
[From XAE500W2K8032][#199378]
The Citrix Print Manager Service (cpsvc.exe) might exit unexpectedly and continue to exit after manually restarting it.
[From XAE500W2K8032][#215074]
Servers might experience a fatal exception, displaying a blue screen, on wdica.sys with stop code 0x50s.
[From XAE500W2K8034][#210814]
On systems where Fix #209610 is installed, licenses are not properly released when user sessions are logged off or disconnected.
[From XAE500W2K8034][#219896]
HDX IntelliCache:
This feature enhancement enables the Citrix Branch Repeater appliance to perform cross-session data compression for XenApp traffic. Cross-session compression reduces and streamlines traffic sent over the wide area network (WAN) when used in conjunction with the Branch Repeater TCP flow control and ICA-aware Quality-of-Service (QoS).
For users behind one Branch Repeater appliance, this data compression can be utilized by sessions that contain compressible traffic, such as:
Sessions for text-heavy applications (such as a word processing application) of identical window size and resolution in owned by multiple users
Single-user sessions of fixed window size and resolutions scrolling through a text-heavy document
Printing identical files inside a single session, multiple users printing identical files
Repetitive file transfers, such as to and from mapped client drives, such as uploading or downloading email attachments
After applying this release to the appropriate servers in your environment, you can adjust the listed registry settings on each server as needed. You must disconnect, then reconnect any session used for testing after a registry change is made to verify the effect of the registry change.
HKEY_LOCAL_MACHINESystemCurrentControlSetControlCitrixWanScaler
Name: UchBehavior
Type: REG_DWORD
Data: see chart
The universal cache handling information is not reported by the server.
The universal cache handling information is always reported by the server.
The universal cache handling information is reported by the server if a Branch Repeater device is used to optimize the client connection between servers and clients. This is the default value.
HKEY_LOCAL_MACHINESystemCurrentControlSetControlCitrixWanScaler
Name: EnableWanScalerOptimization
Type: REG_DWORD
Data: see chart
Disable Branch Repeater optimization.
Enable Branch Repeater optimization. This is the default value.
Note: If secure client traffic is blocked from optimization (EnableForSecureIca), the EnableWanScalerOptimization settings are ignored and no optimizations are utilized for secure sessions.
HKEY_LOCAL_MACHINESystemCurrentControlSetControlCitrixWanScaler
Name: EnableForSecureIca
Type: REG_DWORD
Data: see chart
Disable Branch Repeater optimization for secure connections. This is the default value.
Enable Branch Repeater optimization for secure connections.
[From XAE500W2K8041][#194626]
Certain user activities, particularly prolonged panning in memory-intensive graphics applications, can cause server memory consumption to grow to almost 100 percent. As a result, the session becomes unresponsive and the server refuses to accept new connections until it is restarted.
[From XAE500W2K8041][#201274]
Servers might experience a fatal exception on vdtw30.dll while shadowing sessions.
[From XAE500W2K8041][#206620]
If the presenter starts a Microsoft Office Live Meeting inside an ICA session, attendees cannot see the meeting onscreen.
[From XAE500W2K8041][#219170]
Servers where Fix #160592 is installed might experience a fatal exception, displaying a blue screen, on vdtw30.dll.
[From XAE500W2K8042][#204955]
Servers might experience a fatal exception, displaying a blue screen, with bugcheck code 3B.
[From XAE500W2K8042][#218613]
This hotfix contains a server stability fix for XenApp.
[From XAE500W2K8046][#208911]
On systems with Fix #211736 installed, session printer autocreation fails on occasion.
[From XAE500W2K8046][#226969]
Installing and Uninstalling This Release
This hotfix is packaged with Microsoft Windows Installer 3.0 as a .msp file. For more information about deploying .msp files, see
or visit the
and search on keyword msiexec.
This installer program complies with Microsoft User Account Control (UAC). If UAC is enabled, you must run the installer prog that is, with administrative privileges enabled. For more information about UAC, see
or visit the
and search on keyword UAC.
To install this hotfix successfully, servers must not have registry modification restrictions in place.
This hotfix might or might not prompt you to restart the server when the installation
or uninstallation is complete. If you are using the Access Management Console,
you must restart the server after installing or uninstalling this hotfix
to ensure that the hotfix is added to or removed from the console's
hotfix inventory list.
If the need arises to restore the original settings and functionality provided by this hotfix, you must uninstall the hotfix before reinstalling it according to the installation instructions below.
To install this hotfix:
Copy the hotfix package to an empty folder on the hard drive of the server you want to update.
Close all applications.
Run the executable.
Restart the server.
If you are using the Access Management Console, restart the server to ensure
the hotfix is added to the console's hotfix inventory list.
To uninstall this hotfix:
From the Start menu, select Control Panel & Programs and Features.
Highlight the hotfix you want to uninstall and click Uninstall.
Follow the directions on-screen.
If you are using the Access Management Console, restart the server to ensure the hotfix is removed from the console's hotfix inventory list.
Files Updated (All Dates/Times UTC)
cdfdrv.sys
12/10/2010
CdfSvc.exe
12/10/2010
CdfSvcPS.dll
12/10/2010
cdmprov.dll
12/10/2010
Citrix.Diagnostics.dll
12/10/2010
Citrix.Diagnostics.Recorder.Cdf.dll
12/10/2010
CitrixUpd.txt
05/06/2009
CitrixXps.txt
05/06/2009
Citrixxps.xml
05/06/2009
CPatch.exe
01/04/2011
CPatchUI.dll
01/04/2011
cpproc.dll
12/10/2010
cpprov.dll
12/10/2010
CPR232469.vbs
01/04/2011
12/10/2010
cpupdrv.dll
12/10/2010
Cpupdui.dll
12/10/2010
Cpxpsupdui.dll
12/10/2010
ctxhfloader.dll
01/04/2011
ctxprn.dll
12/10/2010
ctxrdpwsx.dll
12/10/2010
ctxrpc.dll
12/10/2010
cupdres_de.dll
12/10/2010
cupdres_en.dll
12/10/2010
cupdres_es.dll
12/10/2010
cupdres_fr.dll
12/10/2010
cupdres_ja.dll
12/10/2010
DefaultCapabilities.xml
05/06/2009
icactls.dll
12/10/2010
ImaObjectPermissions.dll
12/10/2010
ImaSrv.exe
12/10/2010
ImaSrvSs.dll
12/10/2010
MfAppSs.dll
12/10/2010
MFErrorUI.dll
12/10/2010
MfRpcSs.dll
12/10/2010
MfSrvSs.dll
12/10/2010
msi50ca.dll
01/04/2011
policy.1.0.Citrix.Diagnostics.config
12/10/2010
policy.1.0.Citrix.Diagnostics.dll
12/10/2010
RADEAppSs.dll
12/10/2010
RADESessionSs.dll
12/10/2010
vdtw30.dll
12/10/2010
12/10/2010
12/10/2010
wshadow.exe
12/10/2010
wsxica.dll
12/10/2010
cdfdrv.cat (driverfiles)
12/10/2010
cdfdrv.inf (driverfiles)
12/10/2010
citrixupd.cat (driverfiles)
01/01/2011
CitrixUpd.inf (driverfiles)
12/10/2010
wdica.cat (driverfiles)
12/10/2010
wdica.inf (driverfiles)
12/10/2010
MD5 Checksum
XAE500W2K8070.msp
DE4EE484AFFBF279DE4B8BB9
cdfdrv.sys
B111CDDFB3024B7BFD54A18D84277F0F
CdfSvc.exe
FEB222E3F60CF32B82FCE
CdfSvcPS.dll
DB513B4B95A
cdmprov.dll
4916C96ABD4C5B1D9B2EB
Citrix.Diagnostics.dll
2EFA11B19B8E
Citrix.Diagnostics.Recorder.Cdf.dll
AEBD53DA4CEF83A5464A39A
CitrixUpd.txt
229724BBF021E9C6CDB341
CitrixXps.txt
229724BBF021E9C6CDB341
Citrixxps.xml
E3C685D07B24DC952F7EF3
CPatch.exe
CPatchUI.dll
A344ECF7E6B59EB08C0939
cpproc.dll
D1FCF4D45EAAB04438C26B
cpprov.dll
FEAA567F5E5A6C11ADF6B824C749C524
CPR232469.vbs
F59BDB363478AEDC0964C
cpupdrv.dll
7F64C71F875EDC1FB8C1E2
Cpupdui.dll
84CA41E89328CED05F3576
Cpxpsupdui.dll
E2BA743CC31A2E6D358CA
ctxhfloader.dll
0FEEDB2F6DB1A
ctxprn.dll
309E6A8D9BC2C
ctxrdpwsx.dll
491C25C639F5D4A9CFECD50
ctxrpc.dll
01DF0DA22A9BB2D61D54E16E0C21E65D
cupdres_de.dll
13CCFDBAA6EFB09B0A46C0F8E5F9C42F
cupdres_en.dll
D5B7D46AAA0DCFE19A4B94CD
cupdres_es.dll
EE2E57FB85CE43B63FDDB7C
cupdres_fr.dll
FDFEB1FA35AE65
cupdres_ja.dll
055DE2ADD94DE
DefaultCapabilities.xml
A71B63C0D4E12317BECE
icactls.dll
05FB5F73977EFF792F38C829C48073EA
ImaObjectPermissions.dll
32BA1F34D3C21F36C9976
ImaSrv.exe
D51DABB6D92EB1CC877E2AF
ImaSrvSs.dll
68E433DE5DB0DCA39D09C7
MfAppSs.dll
74762EADE2E8CE85D9433C
MFErrorUI.dll
EA069FC31DBDB917
MfRpcSs.dll
A6708CAA7F8938E69FCB7174
MfSrvSs.dll
93F9C2D983
msi50ca.dll
A70D189F1F10D73D7D6F
policy.1.0.Citrix.Diagnostics.config
F48E6C6E330F39C240D9E13D473D3891
policy.1.0.Citrix.Diagnostics.dll
911BDE6BCAE08EA067849FF
RADEAppSs.dll
5B5A7B00DBA7BC9CFADBA6
RADESessionSs.dll
DDB5E8E919
vdtw30.dll
78FE1DEBFE34EA5B0DD3141
BE1F3BB20039C12DBF78C2
617BF4D69E8E90EFBA7AD
wshadow.exe
76651FEF866E25CB7EC2EBE
wsxica.dll
EF1CFBFF0593
cdfdrv.cat (driverfiles)
DC662B04CAF5
cdfdrv.inf (driverfiles)
FBFB51CBC8A41D7BC008C24BFD30448E
citrixupd.cat (driverfiles)
4D54E961B1F990D16F9BE
CitrixUpd.inf (driverfiles)
AD3D2BD2E4A70A4EDC36292
wdica.cat (driverfiles)
D5100D77BEAE86B338D5CB7A847C2E97
wdica.inf (driverfiles)
5D882ED670A8965DEE9421
Copyright & 2011 Citrix Systems, Inc. All rights reserved.
Citrix is a
registered trademark, and Citrix Presentation Server and Citrix XenApp are trademarks of Citrix Systems, Inc. in the United States and other countries.
All other trademarks and registered trademarks are the property of their respective owners.
本文来源为所有,翻译后版权归翻译者所有.如需转载请注明出处.