Bug#489470: linux-image-2.6.25-2-amd64: pciehp stops working in 2.5.25,
Bug#489470: linux-image-2.6.25-2-amd64: pciehp stops working in 2.5.25,
[Marc Lehmann]
Package: linux-image-2.6.25-2-amd64
Version: 2.6.25-6
Severity: normal
pciehp stopped working after upgrading to 2.6.25.
(note that the nvidia kernel module was only loaded _after_ the problem
occured so the kernel was not tainted)
to my knowledge, the bc4328 device was never pci-hotplugged before, so it
is unclear what 0c:00.0 has to do with pciehp.
-- Package-specific info:
** Version:
Linux version 2.6.25-2-amd64 (Debian 2.6.25-6) () (gcc version
(prerelease) (Debian 4.1.2-23)) #1 SMP Fri Jun 27 00:16:12 UTC
** Command line:
auto BOOT_IMAGE=default ro root=802
** Tainted: P (1)
** Kernel log:
202.210641] Unload service driver hpdriver on pcie device c.3:pcie02
202.2***3] Unload service driver hpdriver on pcie device c.1:pcie02
202.210723] Unload service driver hpdriver on pcie device c.0:pcie02
202.211886] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
207.992352] pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
207.992820] Load service driver hpdriver on pcie device c.0:pcie02
207.992844] pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
208.996614] pciehp: Device .0 already exists at c:0, cannot hot-add
208.996672] pciehp: Cannot add device 0xc:0
208.996743] Load service driver hpdriver on pcie device c.1:pcie02
208.996766] pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
208.996883] Load service driver hpdriver on pcie device c.3:pcie02
208.996897] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
228.619141] Unload service driver hpdriver on pcie device c.3:pcie02
228.619191] Unload service driver hpdriver on pcie device c.1:pcie02
228.619220] Unload service driver hpdriver on pcie device c.0:pcie02
228.619434] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
291.820935] ACPI: PCI interrupt for device .0 disabled
298.500340] pciehp: HPC vendor_id 8086 device_id 27d0 ss_vid 0 ss_did 0
298.501476] Load service driver hpdriver on pcie device c.0:pcie02
298.501498] pciehp: HPC vendor_id 8086 device_id 27d2 ss_vid 0 ss_did 0
299.505269] pciehp: Device .0 already exists at c:0, cannot hot-add
299.505328] pciehp: Cannot add device 0xc:0
299.505386] Load service driver hpdriver on pcie device c.1:pcie02
299.505406] pciehp: HPC vendor_id 8086 device_id 27d6 ss_vid 0 ss_did 0
299.505509] Load service driver hpdriver on pcie device c.3:pcie02
299.505519] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
316.699716] Unload service driver hpdriver on pcie device c.3:pcie02
316.699756] Unload service driver hpdriver on pcie device c.1:pcie02
316.699783] Unload service driver hpdriver on pcie device c.0:pcie02
517.042554] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
546.665793] ACPI: PCI Interrupt .0[A] -& GSI 17 (level, low) -&
546.665918] PCI: Setting latency timer of device .0 to 64
546.734468] ssb: Sonics Silicon Backplane found on PCI device .0
546.794299] b43-phy1: Broadcom 4321 WLAN found
546.806420] ACPI: PCI Interrupt .0[A] -& GSI 17 (level, low) -&
546.838450] b43-phy1 ERROR: FOUND UNSUPPORTED PHY (Analog 5, Type 4,
Revision 1)
546.838570] b43: probe of ssb0:0 failed with error -95
546.838636] Broadcom 43xx driver loaded [ Features: PMLR, Firmware-ID: FW13 ]
546.870466] ssb: Sonics Silicon Backplane found on PCI device .0
546.870544] b44.c:v2.0
546.891053] eth0: Broadcom 44xx/47xx 10/100BaseT Ethernet 00:18:8b:b0:90:db
546.924880] ADDRCONF(NETDEV_UP): eth1: link is not ready
550.558813] b44: eth1: Link is up at 100 Mbps, full duplex.
550.558871] b44: eth1: Flow control is off for TX and off for RX.
550.559443] ADDRCONF(NETDEV_CHANGE): eth1: link becomes ready
560.767285] eth1: no IPv6 routers present
691.963197] PCI: Setting latency timer of device .0 to 64
691.963329] NVRM: loading NVIDIA UNIX x86_64 Kernel Module
4 23:40:50 PDT 2008
** Loaded modules:
1 ip_tables
3 nfs,nfsd
2 nfs,nfsd
auth_rpcgss
nfs,nfsd,lockd,nfs_acl,auth_rpcgss
pci_hotplug
cpufreq_ondemand
acpi_cpufreq
freq_table
2 cpufreq_ondemand,acpi_cpufreq
snd_hda_intel
snd_pcm_oss
snd_mixer_oss
1 snd_pcm_oss
2 snd_hda_intel,snd_pcm_oss
1 mac80211
snd_hda_intel,snd_pcm_oss,snd_mixer_oss,snd_pcm,snd_timer
input_polldev
2 nvidia,i2c_i801
snd_page_alloc
2 snd_hda_intel,snd_pcm
ff_memless
ide_generic
0 [permanent]
dm_snapshot
2 dm_mirror,dm_snapshot
ide_pci_generic
0 [permanent]
ide_generic,ide_pci_generic
ata_generic
firewire_ohci
firewire_core
1 firewire_ohci
ata_piix,ata_generic
sg,sr_mod,sd_mod,libata
1 firewire_core
pcmcia_core
firmware_class
4 acpi_cpufreq,thermal
** PCI devices:
00:00.0 Host bridge [0600]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express Memory Controller Hub [] (rev 03)
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort+ &SERR- &PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information &?&
Kernel modules: intel-agp
00:01.0 PCI bridge [0604]: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML
and 945GT Express PCI Express Root Port [] (rev 03) (prog-if 00
[Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
I/O behind bridge: 0efff
Memory behind bridge: ed000000-efefffff
Prefetchable memory behind bridge: 0dfffffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA+ MAbort- &Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [88] Subsystem: Dell Device [1028:01cd]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [90] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Address: fee0300c
Data: 4161
Capabilities: [a0] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s &64ns,
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 &256ns, L1 &4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 E RCB 64 bytes Disabled- Retrain-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug-
1, PowerLimit 75.000000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet- CmdCplt- HPIrq-
Control: AttnInd Off, PwrInd On, Power- Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet+ LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [100] Virtual Channel &?&
Capabilities: [140] Root Complex Link &?&
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1b.0 Audio device [0403]: Intel Corporation 82801G (ICH7 Family) High
Definition Audio Controller [] (rev 01)
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 1275
Region 0: Memory at efffc000 (64-bit, non-prefetchable) [size=16K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=55mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [60] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Address: fee0300c
Data: 41a9
Capabilities: [70] Express (v1) Root Complex Integrated Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s &64ns,
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #0, Speed unknown, Width x0, ASPM unknown, Latency
L0 &64ns, L1 &1us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM D Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed unknown, Width x0, TrErr- Train- SlotClk-
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel &?&
Capabilities: [130] Root Complex Link &?&
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
00:1c.0 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 1 [] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0b, subordinate=0b, sec-latency=0
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort+ &SERR- &PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- &Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #1, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 &1us, L1 &4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM D RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
2, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal+ PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Address: fee0300c
Data: 4169
Capabilities: [90] Subsystem: Dell Device [1028:01cd]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel &?&
Capabilities: [180] Root Complex Link &?&
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.1 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 2 [] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0c, subordinate=0c, sec-latency=0
Memory behind bridge: ecf00000-ecffffff
Prefetchable memory behind bridge: 0e00fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort+ &SERR+ &PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- &Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #2, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 &256ns, L1 &4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM D RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive+ BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
3, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet+
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Address: fee0300c
Data: 4171
Capabilities: [90] Subsystem: Dell Device [1028:01cd]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel &?&
Capabilities: [180] Root Complex Link &?&
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1c.3 PCI bridge [0604]: Intel Corporation 82801G (ICH7 Family) PCI Express
Port 4 [] (rev 01) (prog-if 00 [Normal decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx+
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Bus: primary=00, secondary=0d, subordinate=0e, sec-latency=0
I/O behind bridge: 0dfff
Memory behind bridge: ecc00000-ecefffff
Prefetchable memory behind bridge: 0e03fffff
Secondary status: 66MHz- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- &Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [40] Express (v1) Root Port (Slot+), MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s
unlimited, L1 unlimited
ExtTag- RBE- FLReset-
DevCtl: Report errors: Correctable+ Non-Fatal+ Fatal+
Unsupported+
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr+
TransPend-
LnkCap: Port #4, Speed 2.5GT/s, Width x1, ASPM L0s L1, Latency
L0 &1us, L1 &4us
ClockPM- Suprise- LLActRep+ BwNot-
LnkCtl: ASPM D RCB 64 bytes Disabled- Retrain- CommClk-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x0, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
SltCap: AttnBtn- PwrCtrl- MRL- AttnInd- PwrInd- HotPlug+
5, PowerLimit 6.500000; Interlock- NoCompl-
SltCtl: Enable: AttnBtn- PwrFlt- MRL- PresDet+ CmdCplt- HPIrq+
Control: AttnInd Unknown, PwrInd Unknown, Power-
Interlock-
SltSta: Status: AttnBtn- PowerFlt- MRL- CmdCplt- PresDet-
Interlock-
Changed: MRL- PresDet- LinkState-
RootCtl: ErrCorrectable- ErrNon-Fatal- ErrFatal- PMEIntEna-
CRSVisible-
RootCap: CRSVisible-
RootSta: PME ReqID 0000, PMEStatus- PMEPending-
Capabilities: [80] Message Signalled Interrupts: Mask- 64bit- Queue=0/0
Address: fee0300c
Data: 4179
Capabilities: [90] Subsystem: Dell Device [1028:01cd]
Capabilities: [a0] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [100] Virtual Channel &?&
Capabilities: [180] Root Complex Link &?&
Kernel driver in use: pcieport-driver
Kernel modules: shpchp
00:1d.0 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
#1 [] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 4: I/O ports at bf80 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.1 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
#2 [] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 21
Region 4: I/O ports at bf60 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.2 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
#3 [8086:27ca] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin C routed to IRQ 22
Region 4: I/O ports at bf40 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.3 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB UHCI
#4 [8086:27cb] (rev 01) (prog-if 00 [UHCI])
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin D routed to IRQ 23
Region 4: I/O ports at bf20 [size=32]
Kernel driver in use: uhci_hcd
Kernel modules: uhci-hcd
00:1d.7 USB Controller [0c03]: Intel Corporation 82801G (ICH7 Family) USB2 EHCI
Controller [8086:27cc] (rev 01) (prog-if 20 [EHCI])
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 20
Region 0: Memory at ffa80000 (32-bit, non-prefetchable) [size=1K]
Capabilities: [50] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=375mA
PME(D0+,D1-,D2-,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [58] Debug port: BAR=1 offset=00a0
Kernel driver in use: ehci_hcd
Kernel modules: ehci-hcd
00:1e.0 PCI bridge [0604]: Intel Corporation 82801 Mobile PCI Bridge
[] (rev e1) (prog-if 01 [Subtractive decode])
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0
Bus: primary=00, secondary=03, subordinate=03, sec-latency=32
Memory behind bridge: ecb00000-ecbfffff
Secondary status: 66MHz- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort+ &SERR- &PERR-
BridgeCtl: Parity- SERR+ NoISA- VGA- MAbort- &Reset- FastB2B-
PriDiscTmr- SecDiscTmr- DiscTmrStat- DiscTmrSERREn-
Capabilities: [50] Subsystem: Dell Device [1028:01cd]
00:1f.0 ISA bridge [0601]: Intel Corporation 82801GBM (ICH7-M) LPC Interface
Bridge [] (rev 01)
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Capabilities: [e0] Vendor Specific Information &?&
Kernel modules: intel-rng, iTCO_wdt
00:1f.2 IDE interface [0101]: Intel Corporation 82801GBM/GHM (ICH7 Family)
Serial ATA Storage Controller IDE [] (rev 01) (prog-if 80 [Master])
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem- BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz+ UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin B routed to IRQ 17
Region 0: I/O ports at 01f0 [size=8]
Region 1: I/O ports at 03f4 [size=1]
Region 2: I/O ports at 0170 [size=8]
Region 3: I/O ports at 0374 [size=1]
Region 4: I/O ports at bfa0 [size=16]
Capabilities: [70] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot+,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Kernel driver in use: ata_piix
Kernel modules: ata_generic, ata_piix, ide-pci-generic
00:1f.3 SMBus [0c05]: Intel Corporation 82801G (ICH7 Family) SMBus Controller
[8086:27da] (rev 01)
Subsystem: Dell Device [1028:01cd]
Control: I/O+ Mem- BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap- 66MHz- UDF- FastB2B+ ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Interrupt: pin B routed to IRQ 17
Region 4: I/O ports at 10c0 [size=32]
Kernel driver in use: i801_smbus
Kernel modules: i2c-i801
01:00.0 VGA compatible controller [0300]: nVidia Corporation GeForce Go 7900 GS
[10de:0298] (rev a1) (prog-if 00 [VGA])
Subsystem: Dell Device [b]
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR- FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0
Interrupt: pin A routed to IRQ 16
Region 0: Memory at ed-bit, non-prefetchable) [size=16M]
Region 1: Memory at d-bit, prefetchable) [size=256M]
Region 3: Memory at ee-bit, non-prefetchable) [size=16M]
Region 5: I/O ports at ef00 [size=128]
[virtual] Expansion ROM at efe00000 [disabled] [size=128K]
Capabilities: [60] Power Management version 2
Flags: PMEClk- DSI- D1- D2- AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=0 PME-
Capabilities: [68] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Address: 0000
Data: 0000
Capabilities: [78] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s &256ns,
ExtTag- AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd+ ExtTag- PhantFunc- AuxPwr- NoSnoop+
MaxPayload 128 bytes, MaxReadReq 512 bytes
DevSta: CorrErr- UncorrErr- FatalErr- UnsuppReq- AuxPwr-
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x16, ASPM L0s L1, Latency
L0 &256ns, L1 &4us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM L1 E RCB 128 bytes Disabled- Retrain-
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x16, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Virtual Channel &?&
Capabilities: [128] Power Budgeting &?&
Kernel driver in use: nvidia
Kernel modules: nvidiafb, nvidia
03:00.0 Ethernet controller [0200]: Broadcom Corporation BCMBase-TX
[14e4:170c] (rev 02)
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 64
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ecbfe000 (32-bit, non-prefetchable) [size=8K]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: b44
Kernel modules: b44
03:01.0 FireWire (IEEE 1394) [0c00]: Ricoh Co Ltd R5C832 IEEE 1394 Controller
[] (prog-if 10 [OHCI])
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 64 (500ns min, 1000ns max)
Interrupt: pin A routed to IRQ 19
Region 0: Memory at ecbfd800 (32-bit, non-prefetchable) [size=2K]
Capabilities: [dc] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME+
Kernel driver in use: firewire_ohci
Kernel modules: firewire-ohci
03:01.1 Generic system peripheral [0805]: Ricoh Co Ltd R5C822
SD/SDIO/MMC/MS/MSPro Host Adapter [] (rev 19) (prog-if 01)
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Latency: 64
Interrupt: pin B routed to IRQ 18
Region 0: Memory at ecbfd500 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Kernel driver in use: sdhci
Kernel modules: sdhci
03:01.2 System peripheral [0880]: Ricoh Co Ltd R5C592 Memory Stick Bus Host
Adapter [] (rev 0a)
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 0: Memory at ecbfd600 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
03:01.3 System peripheral [0880]: Ricoh Co Ltd xD-Picture Card Controller
[] (rev 05)
Subsystem: Dell Device [1028:01cd]
Control: I/O- Mem+ BusMaster- SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=medium &TAbort-
&TAbort- &MAbort- &SERR- &PERR- INTx-
Interrupt: pin B routed to IRQ 9
Region 0: Memory at ecbfd700 (32-bit, non-prefetchable) [size=256]
Capabilities: [80] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0+,D1+,D2+,D3hot+,D3cold+)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
0c:00.0 Network controller [0280]: Broadcom Corporation Device [14e4:4328] (rev
Subsystem: Dell Device []
Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr-
Stepping- SERR+ FastB2B- DisINTx-
Status: Cap+ 66MHz- UDF- FastB2B- ParErr- DEVSEL=fast &TAbort- &TAbort-
&MAbort- &SERR- &PERR- INTx-
Latency: 0, Cache Line Size: 64 bytes
Interrupt: pin A routed to IRQ 17
Region 0: Memory at ecffc000 (64-bit, non-prefetchable) [size=16K]
Region 2: Memory at e-bit, prefetchable) [size=1M]
Capabilities: [40] Power Management version 2
Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA
PME(D0-,D1-,D2-,D3hot-,D3cold-)
Status: D0 PME-Enable- DSel=0 DScale=2 PME-
Capabilities: [58] Message Signalled Interrupts: Mask- 64bit+ Queue=0/0
Address: 0000
Data: 0000
Capabilities: [d0] Express (v1) Endpoint, MSI 00
DevCap: MaxPayload 128 bytes, PhantFunc 0, Latency L0s &4us, L1
ExtTag+ AttnBtn- AttnInd- PwrInd- RBE- FLReset-
DevCtl: Report errors: Correctable- Non-Fatal- Fatal-
Unsupported-
RlxdOrd- ExtTag- PhantFunc- AuxPwr- NoSnoop-
MaxPayload 128 bytes, MaxReadReq 128 bytes
DevSta: CorrErr+ UncorrErr+ FatalErr- UnsuppReq+ AuxPwr+
TransPend-
LnkCap: Port #0, Speed 2.5GT/s, Width x1, ASPM unknown, Latency
L0 &4us, L1 &64us
ClockPM- Suprise- LLActRep- BwNot-
LnkCtl: ASPM D RCB 64 bytes Disabled- Retrain- CommClk+
ExtSynch- ClockPM- AutWidDis- BWInt- AutBWInt-
LnkSta: Speed 2.5GT/s, Width x1, TrErr- Train- SlotClk+
DLActive- BWMgmt- ABWMgmt-
Capabilities: [100] Advanced Error Reporting &?&
Capabilities: [13c] Virtual Channel &?&
Capabilities: [15c] Power Budgeting &?&
Kernel driver in use: b43-pci-bridge
Kernel modules: ssb
-- System Information:
Debian Release: lenny/sid
APT prefers testing
APT policy: (700, 'testing'), (500, 'unstable'), (500, 'stable'), (1,
'experimental')
Architecture: amd64 (x86_64)
/bin/sh linked to /bin/dash
Kernel: Linux 2.6.25-2-amd64
Locale: LANG=C, LC_CTYPE=de_DE.UTF-8 (charmap=UTF-8)
Versions of packages linux-image-2.6.25-2-amd64 depends on:
debconf [debconf-2.0]
1.5.11etch1 Debian configuration management sy
initramfs-tools [linux-initr 0.88
tools for generating an initramfs
module-init-tools
3.3-pre4-2
tools for managing Linux kernel mo
linux-image-2.6.25-2-amd64 recommends no packages.
-- debconf information excluded
To UNSUBSCRIBE, email to
with a subject of &unsubscribe&. Trouble? Contact
&Prev&in&Thread]
Current&Thread
Bug#489470: linux-image-2.6.25-2-amd64: pciehp stops working in 2.5.25, worked in 2.6.24,
Marc Lehmann&&=
, maximilian attems
Message not available
, maximilian attems
Message not available
, maximilian attems
Previous&by&Date:&
, Marco d'Itri
Next&by&Date:&
, AnÃbal Monsalve Salazar
Previous&by&Thread:&
, Marco d'Itri
Next&by&Thread:&
, maximilian attems
